|
Failure Analysis of Two HP-Nb Heat-Resistant Tubes after 46,000 h Exposure to Reformer Service Conditions
|
10.3390/met13020228 |
1401 - 10 |
|
High-Velocity Oxy-Fuel (HVOF) Spray Coating of Inconel, Colmonoy, and Aluminum on AISI 316L Stainless Steel: A Comparative Investigation of the Microstructure and Corrosion Resistance of Coatings
|
10.3390/coatings13010204 |
1401 - 10 |
|
Gas-phase aluminizing of HP40Nb steel used in reformer tubes: Synthesis, characterization, and its implications for the microstructure and high-temperature creep resistance of the base alloy
|
10.1016/j.ijpvp.2022.104833 |
1401 - 07 |
|
Transient liquid phase (TLP) bonding of Ti-6Al-4V/AISI 304 stainless steel using Cu/CNT composite interlayer
|
10.1016/j.jmrt.2022.08.151 |
1401 - 06 |
|
Magnetic-MXene-based nanocomposites for water and wastewater treatment: A review
|
10.1016/j.jwpe.2022.102696 |
1401 - 03 |
|
Effects of ER308L buttering and post-buttering heat treatment on the microstructure and mechanical properties of API 5L X65/AISI304 dissimilar joint
|
10.1016/j.ijpvp.2022.104702 |
1401 - 02 |
|
Synthesis and characterization of Ag-ion-exchanged zeolite/TiO2 nanocomposites for antibacterial applications and photocatalytic degradation of antibiotics
|
10.1016/j.envres.2021.112157 |
1401 - 02 |
|
An Investigation on the Microstructure, Interface, and Mechanical Properties of Spark Plasma Sintered Ni/Ni-Ni3Al/Ni Compound
|
10.1007/s11665-021-06227-9 |
1400 - 11 |
|
High Temperature Oxidation Behavior of Aluminide Coatings Applied on HP-MA Heat Resistant Steel Using a Gas-Phase Aluminizing Process
|
# |
1400 - 11 |
|
Oxidation and phase transformation behaviors of Si3N4-xMgAl2O4 (0 < x < 90 wt.%) nanocomposites in vacuum, air, and nitrogen atmospheres
|
10.1016/j.ceramint.2021.07.261 |
1400 - 06 |
|
Stress relaxation cracking failure in a high pressure steam pipeline in an ammonia plant
|
10.1016/j.ijpvp.2021.104542 |
1400 - 06 |
|
Filler Metal Influence on the Weld Metal Structure of 25Cr-35Ni Heat Resistant Steel
|
# |
1400 - 06 |
|
Root cause analysis of a failure in a flange-pipe welded joint in a steam line in an ammonia plant: Experimental investigation and simulation assessment
|
10.1016/j.engfailanal.2021.105730 |
1400 - 06 |
|
Surface Modification of TiO2 Nanoparticles with CuO for Visible-Light Antibacterial Applications and Photocatalytic Degradation of Antibiotics
|
# |
1400 - 05 |
|
Establishing the Cause of Failure in a Secondary Reformer Nozzle in an Ammonia Plant
|
10.1007/s11668-021-01182-y |
1400 - 05 |
|
Microstructure and mechanical properties of spark plasma sintered AlCoFeMnNi high entropy alloy (HEA)-carbon nanotube (CNT) nanocomposite
|
10.1016/j.jallcom.2020.158577 |
1400 - 02 |
|
Establishing the root cause of a failure in a firewater pipeline
|
10.1016/j.engfailanal.2021.105474 |
1400 - 02 |
|
Root cause analysis of an unexpected brittle failure in a carbon steel slab
|
10.1016/j.engfailanal.2020.105205 |
1400 - 01 |
|
Microstructure and Mechanical Properties of Spark Plasma Sintered Nanocrystalline TiAl-xB Composites (0.0 <x<1.5 at.%) Containing Carbon Nanotubes
|
10.1007/s11665-021-05773-6 |
1400 - 01 |
|
Facile Synthesis of Ag Nanowire/TiO2 and Ag Nanowire/TiO2/GO Nanocomposites for Photocatalytic Degradation of Rhodamine B
|
10.3390/ma14040763 |
1399 - 11 |