|
Structural, electrical, optical and morphological properties of aluminum-doped TiO2 thin films deposited by spray pyrolysis method
|
10.1007/s10854-020-03286-x |
1399 - 01 |
|
Recycling of electric arc furnace dust into glass-ceramic
|
# |
1396 - 10 |
|
Electrochemical Hydrogen Storage Capacity of Ti0.9Zr0.1Mn1.2V0.4Cr0.4 Alloy Synthesized by Ball Milling and Annealing
|
# |
1394 - 07 |
|
Evaluation of oxidation behavior of laser clad CoWSi WSi2 coating on pure Ni substrate at different temperatures
|
# |
1394 - 06 |
|
Effect of CaO on the Formation of PSZ and Gamma-Zirconia Nanoparticles through Ball Milling
|
# |
1394 - 04 |
|
The Effect of Sintering Temperature on Microstructure and Hardness of the Milled WC- 20 Wt. Equiatomic (Fe Co) Cemented Carbides
|
# |
1393 - 10 |
|
The electrochemical hydrogen storage properties of Ti0.72Zr0.28Mn1.6V0.4 alloy synthesized by vacuum plasma spraying and vacuum copper boat induction melting A comparative study
|
# |
1393 - 10 |
|
The Effect of sintering temperature on microstructure and hardness of milled WC-20 wt. equiatomic (Fe Co) cemented carbides
|
# |
1393 - 10 |
|
CoWSi/WSi2 Nanocomposite Produced by Mechanical Alloying
|
# |
1393 - 06 |
|
Formation of Beta-zirconia and Gama-zirconia nano-particles from Alfa-zirconia by mechanical activation
|
# |
1393 - 06 |
|
Hydrogen storage properties of Ti0.72Zr0.28Mn1.6V0.4 alloy prepared by mechanical alloying and copper boat induction melting
|
# |
1393 - 05 |
|
Sintering and Characterization of WC-20wt. (Fe Co) Nano-Structured Powders Developed by Ball-Milling
|
# |
1393 - 04 |
|
Synthesis of CoWSi WSi2 nanocomposite by mechanical alloying and subsequent heat treatment
|
# |
1393 - 01 |
|
Laser cladding of CoWSi/WSi2 on Ni substrate and evaluation of its high temperature oxidation behavior
|
# |
1393 - 01 |
|
Characterization of Nanocrystalline Nickel-Cobalt Alloys Synthesized by Direct and Pulse Electrodeposition
|
# |
1392 - 12 |
|
Characterization and Synthesis of Co(ss)/WSi2-CoWSi Nanocomposite by Mechanical Alloying and Subsequent Sintering
|
# |
1392 - 11 |
|
An investigation on the effect of electrochemical adsorbates on properties of electrodeposited nanocrystalline Fe-Ni alloys
|
# |
1391 - 10 |
|
Developing Al2O3-TiC in-situ nanocomposite by SHS and analyzing the effects of Al content and mechanical activation on microstructure
|
# |
1391 - 10 |
|
Production of Fe-TiN and Fe-Ti(N C) composite powder by mechanical alloying
|
# |
1391 - 01 |
|
Synthesis Characterization and Optimization of Nanostructured Fe Ni Coatings by Electrodeposition Method
|
# |
1391 - 01 |