Articles

type: Journal
Title DOI Date
Selected challenges in solidification processing of graphene nanoplatelets (GNPs) reinforced aluminum alloys composites #
A Novel Feature Engineering Approach for Predicting Melt Pool Depth during LPBF by Machine Learning Models #
Process-Induced Microstructural Variations in Laser Powder Bed Fusion of Novel Titanium Alloys: A Comprehensive Study on Volumetric Energy Density and Alloying Effects #
A New Generation of Metal Chillers to Control the Solidification Structure of Al-4.5wt%Cu Alloy #
Effects of Homogenization Heat Treatment on Microstructure, Mechanical and Corrosion Properties of Transient Liquid Phase (TLP)-Bonded Inconel 617/AISI 310 Stainless Steel #
Effects of Cu addition and heat treatment on the microstructure and hardness of pure Ti prepared by Selective laser melting (SLM) #
Effects of Transient Liquid Phase Bonding Time on Microstructure, Mechanical and Corrosion Properties During Bonding of Inconel 617/AISI 310 Stainless Steel #
Influence of Melt Infiltration Parameters on Structural and Mechanical Properties of Al-4.3wt.%Cu-EP Syntactic Foam #
Synthesis and characterization of Sn-Cu/SiO2(np) lead-free nanocomposite solder through angular accumulative extrusion #
Design and characterization of a novel MgAlZnCuMn Low Melting point Light Weight High Entropy Alloy (LMLW-HEA) #
Microstructure and Corrosion Properties of CP-Ti Processed by Laser Powder Bed Fusion under Similar Energy Densities #
A Novel Cast Nanocomposite with Enhanced Fatigue Life 10.1007/s11837-022-05473-z
Manufacturing and characterization of Sn-Cu/SiO2np lead-free nanocomposite solder by accumulative roll bonding (ARB) process 10.1007/s10854-022-08286-7
Use of Low Melting Point Metals and Alloys (Tm less than 420 Degree C) as Phase Change Materials A review #
In-situ alloying of a fine grained fully equiaxed Ti based alloy via Electron Beam Powder Bed Fusion Additive Manufacturing process #
Ultrasonically Stir Cast SiO2/A356 Metal Matrix Nanocomposites #
Numerical simulation of the effects of a Phase Change Material (PCM) on solidification path of gravity sand cast Al-Cu alloy #
In-situ Al-SiOC composite fabricated by in-situ pyrolysis of a silicone polymer gel in aluminum melt #
In-Situ Alloying in Laser-Based Additive Manufacturing Processes: A Critical Review #
Effect of Bonding Temperature on Microstructure and Mechanical Properties of Dissimilar Joint Between Inconel 617 and Stainless Steel 310 10.1007/s13632-021-00748-4