238. N. Raeisi Kheirabadi, F. Karimzadeh, M.H. Enayati, E.N. Kalali, Green flexible triboelectric nanogenerators based on edible proteins for electrophoretic deposition, Advanced Electronic Materials, in press
237. M. Adamzadeh,.M.H. Enayati, M. Shamanian, P. Khayambashi, Tribological behavior of ni-nb amorphous coating fabricated by mechanical alloying method, Tribology International, vol. 177, 2023, 108016, https://doi.org/10.1016/j.triboint.2022.108016
236. M.A. Karimi, M. Shamanian, M.H. Enayati, M. Adamzadeh, M. Imani, Fabrication of a novel magnetic high entropy alloy with desirable mechanical properties by mechanical alloying and spark plasma sintering, Journal of Manufacturing Processes, Vol. 84, 2022, pp. 859-870, https://doi.org/10.1016/j.jmapro.2022.10.048
235. M. Larki, M.H. Enayati, H. Rostamabadi, Basil seed gum promotes the electrospinnability of WPI for co-encapsulation of ZnO nanoparticles and curcumin, Carbohydrate Polymers, 294, 2022, 119966, 10.1016/j.carbpol.2022.119761
234. F.Sourani, K. Raeissi, M.H. Enayati, M. Kharaziha, A. Hakimizad, G. Blugan, H.R. Salimijazi, Corrosion and tribocorrosion behavior of ZrO2-Al2O3 composite coatings developed by plasma electrolytic oxidation for load-bearing implants, Journal of Alloys and Compounds, 920, 2022, 165856, 10.1016/j.jallcom.2022.165856
233. N.Fani, M.H. Enayati, H. Rostamabadi, S.R.Falsafi, Encapsulation of bioactives within electrosprayed κ-carrageenan nanoparticles, Carbohydrate Polymers, 294, 2022, 119761, 10.1016/j.carbpol.2022.119761
232. E. Rezvani Ghomi, S. Nouri Khorasani, M.S. Koochaki M. Dinari, S. Ataeia, M.H. Enayati, O. Das, R. Esmaeely Neisiany, Synthesis of TiO2 nanogel composite for highly efficient self-healing epoxy coating, Journal of Advanced Research, 2022, 10.1016/j.jare.2022.02.008
231. F.S. Sayyedan, M.H. Enayati, M.R. Rahimipour, Microstructure and mechanical properties of spark plasma sintered amorphous AlPO4 ceramics, Advanced Ceramics Progress, 2021, 7, pp. 52-58, 10.30501/ACP.2022.326779.1081
230. F.S. Sayyedan, M.H. Enayati, S.M. Nahvi, M. Taghipour, Anti-coking and anti-carburizing behavior of amorphous AlPO4 coating, Ceramics International, 48, 2022, pp. 19818-19823, 10.1016/j.ceramint.2022.03.256
229. B. Bakhshi, M.H. Enayati, S. Labbaf, Synthesis, characterization, and optimization of Co-, Mn-, and Zn-substituted ferrite nanoparticles and nanoclusters for cancer theranostic applications, Applied Nanoscience, 2022, 10.1007/s13204-022-02421-w
228. R. Hatami, A. Allafchian, F. Karimzadeh, M. H. Enayati, Fabrication of Fe3O4/Ag-TiO2 magnetic nanocomposite for antibacterial applications, Micro & Nano Letters, 17, 2022, pp. 9-15, 10.1049/mna2.12099
227. M.A. Jalili, Z. Khosroshahi, N. Raeisi, F. Karimzadeh, M.H. Enayati, Green triboelectric nanogenerator based on waste polymers for electrophoretic deposition of titania nanoparticles, Nano Energy, 90A, 2021, 106581.
226. M. Mirzaaghaei, M. H. Enayati, M. Ahmadi, Fabricating the tribological properties and investigating of Ni3Al-MoS2 Composite Coating, Journal of Advanced Materials and Processing, 9, 2021, pp. 21-30.
225. M.A. Karimi, M. Shamanian, M.H. Enayati, Microstructural and mechanical properties assessment of the transient liquid phase bonding of cocufemnni high entropy alloy, Transactions of Nonferrous Metals Society of China, 31, 2021, pp. 3063−3074.
224. R. Tavakoli, M.H. Enayati, Synthesis of intermetallic compounds in the Ni-Cr-Si system by mechanical alloying and spark plasma sintering, SVOA Materials Science and Technology, 3, 2021, pp. 45-50.
223. M.H. Ballam, F. Karimzadeh, M.H. Enayati, A. Sanati, Developing a nanostructured surface layer on AISI 316 stainless steel by ultrasonic surface nanocrystallization and evaluating its tribological properties, Surface Topography: Metrology and Properties, 9, 2021, 025010.
222. F. Sourani, M. H. Enayati, M. Taghipour, High Temperature Oxidation and Wear Behavior of (Fe,Cr)Al Intermetallic Compound and (Fe,Cr)Al-Al2O3 Nanocomposites, Journal of Materials Engineering and Performance, 10.1007/s11665-021-05710-7.
221. E. Dastanpour, A. Masood, M. H. Enayati, V. Ström, Multi-alloying of Nanomet: Conception and implementation of homogeneous nanocrystallization in high-flux density soft magnetic alloys, Journal of Materials Science, 56, 2021, pp. 10124–10134.
220. M. Ebrahimian, M.H. Enayati, F. Karimzadeh, Y.J. Min, D.E. Kim, Microstructure and mechanical properties of hot-pressed Ti–Co–Si compounds reinforced by intermetallic phases, Materials Characterization, 171, 2021, 110816.
219. S. Fanaee, S. Labbaf, M.H. Enayati, F. Karamali, M.H. Nasr Esfahani, A nano approach towards the creation of a biointerface as stimulator of osteogenic differentiation; Polycaprolactone/Gelatin/Bioactive glass coated with Fibronectin as an active agent, Journal of Material Science and Engineering C, 120, 2021, 111746.
218. A. Razazzadeh, M. Atapour, M. H. Enayati, Corrosion characteristics of TiNbMoMnFe high entropy thin film deposited on AISI316L for biomedical applications, Metals and Materials International, 27, 2021, pp. 2341–2352, https://doi.org/10.1007/s12540-020-00908-1
217. H. Sedighin, M.H. Enayati, Synthesis and characterizations of polyvinyl alcohol-graphite electrospun nanofibers, Journal of Applied Research of Chemical -Polymer Engineering, 4, 2021, pp. 77-88.
216. F. Sourani, M.H. Enayati, F. Ashrafizadeh, F.S. Sayyedan , P.K. Chu, Enhancing surface properties of (Fe, Cr)Al - Al2O3 nanocomposite by oxygen ion implantation, Journal of Alloys and Compounds, 853, 2021, 156892.
215. E. Dastanpour, M.H. Enayati, A. Masood, V. Ström, Crystallization behavior, soft magnetism and nanoindentation of Fe-Si-B-P-Cu alloy on Ni substitution, Journal of Alloys and Compounds, 851, 2021, 156727
214. M. Imani, E. Dastanpoor, M.H. Enayati, A. K. Basak, Thermodynamic prediction of phase formation in Ni-P alloy system during mechanical alloying – comparison with electroless plating technique, Journal of Metals and Materials International, 27, 2021, pp. 1366–1373, https://doi.org/10.1007/s12540-019-00586-8
213. M. Adamzadeh, M.H. Enayati, M. Shamanian, Ni-Nb amorphous coating prepared by mechanical alloying method, Journal of Non-Crystalline Solids, 547, 2020, 120311.
212. S.Z. Anvari, M.H. Enayati, F. Karimzadeh, Wear behavior of Al-Al3V and Al-(Al3V-Al2O3) nanostructured composites fabricated by mechanical alloying and hot extrusion, Journal of Ultrafine Grained and Nanostructured Materials, 53, 2020, pp. 135-145.
211. S.N. Hosseini, F. Karimzadeh, M.H. Enayati, Development of copper-ferrite spinel on the AISI430 steel used for solid oxide fuel cell, Journal of Advanced Materials in Engineering (Esteghlal), 39, 2020, pp.23-44.
210. M. Farghadani, F. Karimzadeh, M.H Enayati, N. Naghshehkesh, A. Ostovari Moghaddam, Fabrication of AZ91D/Cu/Mg2Cu and AZ91D/Mg2Cu/MgCu2/MgO in-situ hybrid surface nanocomposites via friction stir processing, Surface Topography: Metrology and Properties, 8, 2020, 045002.
209. E. Dastanpour, M.H. Enayati, A. Masood, V. Ström, Quantification of the anomalous crystallization and soft magnetic properties of Fe-Si-B-P-Cu (Nanomet) by isothermal calorimetry, Journal of Alloys and Compounds, 830, 2020, 154705.
208. E. Dastanpour, M.H. Enayati, V. Ström, Non-isothermal nanocrystallization of Fe83.3Si4B8P4Cu0.7 (NANOMET®) alloy: Modeling and the heating rate effect on magnetic properties, Journal of Physics D: Applied Physics, 53, 2020, 215002.
207. E. Rezvani Ghomi. S. Nouri Khorasani, M. Karimi Kichi, M. Dinari, S. Ataei, M.H. Enayati, M.S. Koochaki, R. Esmaeely Neisiany, Synthesis and characterization of TiO2/acrylic acid-co-2-acrylamido-2-methyl propane sulfonic acid nanogel composite and investigation its self-healing performance in the epoxy coatings, Colloid and Polymer Science, 298, 2020, pp. 213-223.
206. E. Dastanpour, M.H. Enayati, A. Masood, V. Ström, On the glass forming ability (GFA), crystallization behavior and soft magnetic properties of Nanomet-substituted alloys, Non-Crystalline Solids, 529, 2020, 119774.
205. F. Sourani, M.H. Enayati, A.H.W. Ngan, On the insitu synthesis of (Fe,Cr)Al and (Fe,Cr)Al-Al2O3 nanostructured material, Materials Research Express, 6, No. 8, 2019, pp. 0850c9.
204. M. Imani, M.H. Enayati, A. Basak, A novel approach for mechanical alloying amorphisation in magnetic Fe-Co alloy system, Materials Research Express, 6, No. 7, 2019, pp. 076575.
203. F. Sourani, M.H. Enayati, X. Zhou, S. Wang, A.H.W. Ngan, Nanoindentation behavior of nanostructured bulk (Fe,Cr)Al and (Fe,Cr)Al-Al2O3 nanocomposites, Journal of Alloys and Compounds, 792, 2019, pp. 348-356.
202. S. Fanaee, S. Labbaf, M. H. Enayati, A. Baharlou-Houreh, M. H. Nasr Esfahani, Creation of a unique architectural structure of bioactive glass sub-micron particles incorporated in a polycaprolactone/gelatin fibrous mat; characterization, bioactivity and cellular evaluations, Journal of Biomedical Materials Research: Part A, 107, 2019, pp. 1358-1365.
201. E. Karimzadeh, M. H. Enayati, M. Malekmohammad, H. Fallah, A. Alhaji, The effect of second phase particles on light transmission of ZnS/diamond nanocomposite, Materials Research Express, 6, No. 5, 2019, pp. 055031.
200. A. Darzian Tabari, M.H. Enayati, Formation of intermetallic compounds Fe-Al on steel by ball milling and thermal treatment, Iranian Journal of Surface Science and Engineering, 14, 2019, pp. 79-92.
199. W. Hanna, K. Maung, M. Enayati, J. C. Earthman, F. A. Mohamed, Grain size stability in a cryomilled nanocrystalline Al alloy powders containing diamantane nanoparticles, Materials Science and Engineering A, 746, 2019, pp. 290-299.
198. F.S. Sayyedan, M.H. Enayati, On structure and oxidation behavior of non-stoichiometric amorphous aluminum phosphate coating, Surface Engineering, 35, 2019, pp. 670-676.
197. R. Hatami, A. Allafchian, F. Karimzadeh, M. H. Enayati, Preparation of amino silane magnetic nanocomposite by the sol–gel process and investigation of its antibacterial activity, Micro & Nano Letters, 14, 2019, pp. 196-201.
196. H. Minouei, G.H. Akbari, M.H. Enayati, S.I. Hong, Non-isothermal nano-crystallization kinetics in amorphous Ni55Nb35Si10 alloy, Transactions of Nonferrous Metals Society of China, 29, 2019, pp. 358-364.
195. B. Hassani, R. Vallant, F. Karimzadeh, M.H. Enayati , S. Sabooni, K. Pradeep, Effect of friction stir processing on corrosion behavior of cast AZ91C magnesium alloy, Surface Review and Letters, https://doi.org/10.1142/S0218625X1850213X, 26, 2019, pp. 1-7.
194. E. Karimzadeh, M. H. Enayati, M. Malekmohammad, H. R. Fallah, A. Alhaji, Investigating the effect of size and distribution diamond nanoparticles on hardness and light transmission of Zinc Sulphide/diamond nanocomposite, Iranian Journal of Ceramic Science & Engineering,7, 2018, pp. 1-15.
193. F.S. Sayyedan, M.H. Enayati, M. Hashempour, A.Vicenzo, M. Bestetti, Synthesis and characterization of sol-gel derived non-stoichiometric aluminum phosphate coating, Surface and Coatings Technology, 351, 2018, pp. 128-135.
192. F.S. Sayyedan, M.H. Enayati, Evaluating oxidation behavior of amorphous aluminum phosphate coating, Applied Surface Science, 455, 2018, pp. 821-830.
191. B. Hassani, F. Karimzadeh, M. H. Enayati, F. Mutschlechner, R. Vallant, K. Hassani, The effects of friction stir processing on the wear behavior of the cast AZ91C magnesium alloy, International Journal of Materials Research, 109, 2018, pp. 1-9. https://doi.org/10.3139/146.111598
190. A. Shafeiey, M.H. Enayati, A. Al-Haji, The effect of slip casting and spark plasma sintering (SPS) temperature on the transparency of MgAl2O4 spinel, Ceramics International, 44, 2018, pp. 3536-3540. https://doi.org/10.1016/j.ceramint.2017.10.228
189. H. Minouei, M.H. functunallyEnayati, G.H. Akbari, Evaluation of Microstructure of Ni-Nb-Si Alloy during Mechanical Alloying, Journal of Advanced Materials in Engineering (Esteghlal), 37, 2018, pp. 1-9. https://jame.iut.ac.ir/files/site1/files/article_A-10-530-1-minouie%282%29.pdf
188. S.Z. Anvari, F. Karimzadeh, M.H. Enayati, Synthesis and Characterization of Nanostructured Al-Al3V and Al-(Al3V-Al2O3) Composite by Powder Metallurgy, Materials Science and Technology, 34, 2018, pp. 179-190. https://doi.org/10.1080/02670836.2017.1366736
187. S. Esfandiarpour, M.R. Ehsani, P. Nazemi Ashani, M.H. Enayati, Evaluating the ability of separation and adsorption of SO2 by nano-CuO-Fe2O3/TiO2 in high concentrations and moderate temperatures, Korean Journal of Chemical Engineering, 34, 2017, pp. 2933-2943. https://doi.org/10.1007/s11814-017-0194-y
186. H. Sharifi, S.R. Faradonbeh, M.H. Enayati, Production and characterization of cobalt/vanadium boride composite powder by mechanochemical methos and acid leaching, Journal of Science and Technology of Composites, 40, 2017, pp. 75-82.
185. E. Dastanpoor, M.H. Enayati, Role of impurities in mechanical alloying amorphization of Cu-Zr and Cu-Zr-Al systems, Indian Journal of Engineering & Materials Sciences, 24, 2017, pp. 77-82.
184. S. Sabooni, F. Karimzadeh, M.H. Abbasi, M.H. Enayati, Evaluation of microstructure and mechanical properties of bulk nanostructured Ti5Si3 and Ti5Si3-Al2O3 nanocomposite, Advanced Ceramics Progress, 3, 2017, pp.1-5. https://doi.org/10.1007/s12613-014-0962-1
183. M. Akbari, S. Sabooni, M.H. Enayati, F. Karimzadeh, Synthesis and characterization of FeAl/Al2O3 nanocomposite coating on carbon steel plate by high energy mechanical alloying, Journal of Advanced Materials in Engineering (Esteghlal), 36, 2017, pp. 107-117. DOI: 10.18869/acadpub.jame.36.2.107
182. M. Hajihashemi, N. Yazdian, F. Karimzadeh, M.H. Enayati, Physical, mechanical, and dry sliding wear propertiesof hybrid and non-hybrid Al-V nanocomposites produced by powder metallurgy, Powder Metallurgy, 60, 2017, pp. 309-320. https://doi.org/10.1080/00325899.2017.1315258
181. E. Pourkhorshid, M.H. Enayati, S. Sabooni, F. Karimzadeh, M.H. Paydar, Bulk Al/Al3Zr composite prepared by mechanical alloying and hot extrusion for high temperatures applications, International Journal of Minerals, Metallurgy and Materials, 24, 2017, pp. 937-942. https://doi.org/10.1007/s12613-017-1481-7
180. S. Sabooni, H. Rashtchi, A. Eslami, F. Karimzadeh, M.H. Enayati, K. Raeissi, A.H.W. Ngan, R. Faghih Imani, Dependence of corrosion properties of AISI 304L stainless steel on the austenite grain size, International Journal of Materials Research, 108, 2017, pp. 552-559. https://doi.org/10.3139/146.111512
179. S.N. Hosseini, M.H. Enayati, F. Karimzadeh, A.M. Dayaghi, LaCrO3/CuFe2O4 composite coated Crofer 22 APU stainless steel interconnect of solid oxide fuel cells, Metallurgical and Materials Transactions A, 48, 2017, pp. 3490-3496. https://doi.org/10.1007/s11661-017-4084-z
178. A. Shafeiey, M.H. Enayati, A. Al-Haji, The effect of slip casting parameters on the green density of MgAl2O4 spinel, Ceramics International, 43, 2017, pp. 6069-6074. https://doi.org/10.1016/j.ceramint.2017.01.151
177. M. Abbasi, F. Karimzadeh, M.H. Enayati, Thermal stability evaluation of nanostructured Al6061 alloy produced by cryorolling, Transactions of Nonferrous Metals Society of China, 27, 2017, pp. 754-762. https://doi.org/10.1016/S1003-6326(17)60086-4
176. M. Abbasi, F. Karimzadeh, M.H. Enayati, Mechanical and tribological behavior of severely plastic deformed Al6061 at cryogenic temperatures, Materials Science & Engineering A, 683, 2017, pp. 56-63. https://doi.org/10.1016/j.msea.2016.11.099
175. H. Minouei, G.H. Akbari, M.H. Enayati, S.I. Hong, Amorphization and nanocrystallization of Ni-Nb-Si Alloys, Materials Science & Engineering A, 682, 2017, pp. 396-401. https://doi.org/10.1016/j.msea.2016.11.041
174. S. A. Etesami, M.H. Enayati, A.G. Kalashami, Austenite formation and mechanical properties of a cold rolled ferrite-martensite structure during intercritical annealing, Materials Science & Engineering A, 682, 2017, pp. 296-303. https://doi.org/10.1016/j.msea.2016.09.112
173. M. Imani, M.H. Enayati, Investigation of amorphous phase formation in Fe-Co-Si-B-P - Thermodynamic analysis and comparison between mechanical alloying and rapid solidification experiments, Journal of Alloys and Compounds, 705, 2017, pp. 462-467. https://doi.org/10.1016/j.jallcom.2017.02.100
172. M.H. Enayati, Nanocrystallization of Al powder by cryomilling process, Kona Powder and Particle Journal, 34, 2017, pp. 207-212. https://doi.org/10.14356/kona.2017006
171. M. Mirzaaghaei, M.H. Enayati, M. Ahmadi, Investigating the morphology and build of Cu-Ni3Al-MoS2 composite coating by physical vapor deposition method, Journal of Metallurgical Engineering, 19, 2016, pp. 68-77.
170. M. Abbasi, F. Karimzadeh, M.H. Enayati, Effects of friction stir process parameters on microstructure and mechanical properties of aluminum powder metallurgy parts, Journal of Advanced Materials and Processing, 4, 2016, pp. 38-55.
169. B. Hassani, F. Karimzadeh, M. H. Enayati, S. Sabooni, R. Vallant, Effect of friction stir processing on microstructure and mechanical properties of AZ91C magnesium cast alloy weld zone, Journal of Materials Engineering and Performance, 25, 2016, pp. 2776-2785. https://doi.org/10.1007/s11665-016-2129-x
168. M. Mirzaaghaei, M.H. Enayati, M. Ahmadi, The tribological properties of Cu-Ni3Al-MoS2 composite coating deposited by magnetron sputtering, , Journal of Advanced Materials and Processing, 4, 2016, pp. 37-45.
167. F. Farghadani, F. Karimzadeh, M. H. Enayati, Formation of surface metal matrix composite AZ91/MgxCuy and its wear behavior after T6 heat treatment, Iranian Journal of Surface Science and Engineering, 28, 2016, pp.1-14.
166. S.N. Hosseini, M.H. Enayati, F. Karimzadeh, N.M. Sammes, Formation mechanism, crystallite growth and electrical conductivityof nano-crystalline CuxFe3−xO4(0.75 ≤ x ≤ 1.25) spinels prepared byglycine-nitrate process, Thermochimica Acta, 639, 2016, pp. 91-97. https://doi.org/10.1016/j.tca.2016.07.001
165. M. Jafari, M.H. Enayati, M. Salehi, S.M. Nahvi, J.C. Han, C.G. Park, High temperature oxidation behavior of micro/nanostructured WC-Co coatings deposited from Ni-coated powders using high velocity oxygen fuel spraying, Surface and Coatings Technology, 302, 2016, pp. 426-437. https://doi.org/10.1016/j.surfcoat.2016.06.044
164. S.E. Aghili, M. H. Enayati, F. Karimzadeh, Fabrication of bulk (Fe,Cr)3Al/Al2O3 intermetallic matrix nanocomposite through mechanical alloying and sintering, Acta Metallurgica Sinica (English Letters), 29, 2016, pp. 911-919. https://doi.org/10.1007/s40195-016-0465-3
163. S.R. Anvari, S.M. Monirvaghefi, M.H. Enayati, Fabrication and characterization of nanostructured functionally graded Ni-P electroless coating, Journal of Advanced Materials and Processing, 4, 2016, pp. 19-29.
162. S. A. Etesami, M.H. Enayati, Microstructural evolution and recrystallization kinetics of a cold rolled ferrite-martensite structure during intercritical annealing, Metallurgical and Materials Transactions A, 47, 2016, pp. 3271-3276. https://doi.org/10.1007/s11661-016-3528-1
161. S.A. Etesami, M.H. Enayati, A. Taherizadeh, B. Sadeghian, The influence of volume fraction of martensite and ferrite grain size on ultimate tensile strength and maximum uniform true strain of dual phase steel, Transactions of the Indian Institute of Metals, 69, 2016, pp. 1605-1612. https://doi.org/10.1007/s12666-015-0739-x
160. B. Hassani, F. Karimzadeh, M.H. Enayati, M. Borouni, Effects of friction stir processing and T6 heat treatment on wear properties of weld metal of cast AZ91C alloy, Journal of Advanced Materials in Engineering (Esteghlal), 35, 2016, pp. 99-107.
159. S. Sabooni, F. Karimzadeh, M.H. Enayati, A.H.W. Ngan, Recrystallisation mechanism during friction stir welding of ultrafine- and coarse-grained AISI 304L stainless steel, Science and Technology of Welding and Joining, 21, 2016, pp. 287-294. https://doi.org/10.1080/13621718.2015.1104097
158. S.N. Hosseini, F. Karimzadeh, M.H. Enayati, N.M. Sammes, Oxidation and electrical behavior of CuFe2O4 spinel coated Crofer 22 APU stainless steel for SOFC interconnect application, Solid State Ionics, 289, 2016, pp. 95-105. https://doi.org/10.1016/j.ssi.2016.02.015
157. S. A. Etesami, M.H Enayati, Ferrite-martensite band formation during the intercritical annealing, Journal of Materials Engineering and Performance, 25, 2016, pp. 349-358. https://doi.org/10.1007/s11665-015-1831-4
156. S. E. Aghili, H. Ashrafi, M. H. Enayati, F. Karimzadeh, Thermodynamic analysis of nanostructured (Fe,Cr)3Al formation during mechanical alloying, Materials Research Innovations, 20, 2016, pp. 32-36. https://doi.org/10.1080/14328917.2015.1109174
155. E. Pourkhorshid, M.H. Enayati, F. Karimzadeh, M.H. Paydar, Synthesis of nanocrystalline Al3Zr intermetallic compound with mechanical alloying and heat hreatment, Journal of Metallurgical and Materials Engineering, 26, 2015, pp. 11-22.
154. S. Sabooni, F. Karimzadeh, M.H. Enayati, A.H.W. Ngan, H. Jabbari, Gas tungsten arc welding and friction stir welding of ultrafine grained AISI 304L stainless steel: Microstructural and mechanical behavior characterization, Materials Characterization, 109, 2015, pp. 138–151. https://doi.org/10.1016/j.matchar.2015.08.009
153. M.H. Enayati, E. Dastanpoor, Two-stage amorphization reaction in Ni-Nb-Zr system, Advanced Powder Technology, 26, 2015, pp. 1364-1370. https://doi.org/10.1016/j.apt.2015.07.011
152. G.H. Majzoobi, A. Atrian, M.H. Enayati, Tribological properties of Al7075-SiC nanocomposite prepared by hot dynamic compaction, Composite Interfaces, 22, 2015, pp. 579-593. https://doi.org/10.1080/09276440.2015.1055955
151. S.R. Anvari, S.M. Monirvaghefi, M.H. Enayati, Novel investigation on nanostructured multilayer and functionally graded Ni-P electroless coatings on stainless steel, Journal of Materials Engineering and Performance, 24, 2015, pp. 2373-2381. https://doi.org/10.1007/s11665-015-1533-y
150. S. Sabooni, F. Karimzadeh, M.H. Enayati, A.H.W. Ngan, Friction-stir welding of ultrafine grained austenitic 304L stainless steel produced by martensitic thermomechanical processing, Materials & Design, 76, 2015, pp. 130-140. https://doi.org/10.1016/j.matdes.2015.03.052
149. S.Sabooni, F. Karimzadeh , M.H. Enayati , A.H.W. Ngan, The role of martensitic transformation on bimodal grain structure in ultrafine grained AISI 304L stainless steel, Materials Science & Engineering A, 636, 2015, pp. 221-230. https://doi.org/10.1016/j.msea.2015.03.101
148. M.H. Enayati, F. Karimzadeh, S. Sabooni, M. Jafari, Phase stability in mechanically alloyed Mg-Ni system studied by experiments and thermodynamic calculations, Acta Metallurgica Sinica (English Letters), 28, 2015, pp. 1002-1007. https://doi.org/10.1007/s40195-015-0287-8
147. S.R. Anvari, S.M. Monirvaghefi, M.H. Enayati, Wear characteristics of functionally graded nanocrystalline Ni-P coatings, Surface Engineering, 31, 2015, pp. 693-700. https://doi.org/10.1179/1743294415Y.0000000023
146. E. Dastanpoor, M.H. Enayati, Effect of milling intensity on mechanical alloying of Cu-Zr-Al system, Indian Journal of Engineering & Materials Sciences, 22, 2015, pp. 521-526.
145. S. A. Etesami, M. H. Enayati, F. Karimzadeh, V. Rasta, Investigating the properties of friction welded 2014 Aluminum Joints prepared with different rotational speeds, Transactions of the Indian Institute of Metals, 68, 2015, pp. 479-489. https://doi.org/10.1007/s12666-014-0475-7
144. H. Ashrafi, R. Emadi, M.H. Enayati, Microstructural and hardness changes during isothermal annealing of nanostructured Al-11.6Fe-1.3V-2.3Si alloy, Journal of Materials Engineering and Performance, 24, 2015, pp. 1026-1030. https://doi.org/10.1007/s11665-014-1354-4
143. M. H. Enayati, F. Karimzadeh, M. Jafari, S. Sabooni, Synthesis and hydrogen desorption properties of Mg1.7Al0.15Ti0.15Ni-CNT nanocomposite powder, Journal of Materials Engineering and Performance, 24, 2015, pp. 1100-1106. https://doi.org/10.1007/s11665-015-1391-7
142. S.H. Abdollahi, F. Karimzadeh, M.H. Enayati, Development of surface composite based on Mg-Al-Ni system on AZ31 magnesium alloy and evaluation of formation mechanism, Journal of Alloys and Compounds, 623, 2015, pp. 335-341. https://doi.org/10.1016/j.jallcom.2014.11.029
141. M.H. Enayati, Formation of nanoscale layered structures and subsequent transformations during mechanical alloying of Ni60Nb40 powder mixture in a low energy ball mill, Kona Powder and Particle Journal, 32, 2015, pp. 196-206. https://doi.org/10.14356/kona.2015010
140. H. Ashrafi, M. H. Enayati, R. Emadi, Tribological properties of nanostructured Al/Al12(Fe,V)3Si alloys, Acta Metallurgica Sinica (English Letters), 28, 2015, pp. 83-92. https://doi.org/10.1007/s40195-014-0171-y
139. A. Atrian, G.H. Majzoobi, M.H. Enayati, H. Bakhtiari, A comparative study on hot dynamic compaction and quasi-static hot pressing of Al7075/SiCnp nanocomposite, Advanced Powder Technology, 26, 2015, pp. 73-82. https://doi.org/10.1016/j.apt.2014.08.007
138. S.Sabooni, Z.Aghaei, F.Karimzadeh, M.H.Enayati, A.H.W.Ngan, Austenite stability during nanoindentation of ultrafine and coarse grained AISI 304L stainless steels, International Journal of Iron and Steel Society of Iran, 11, 2014, pp. 1-5.
137. M. Jafari, M. H. Enayati, M. Salehi, S. M. Nahvi, S. N. Hosseini, C. G. Park, Influence of nickel – coated nanostructured WC-Co powders on microstructural and tribological properties of HVOF coatings, Journal of Thermal Spray Technology, 23, 2014, pp 1456-1469. https://doi.org/10.1007/s11666-014-0171-5
136. R.Nafar Dehsorkhi, S.Sabooni, F.Karimzadeh, A.Rezaeian, M.H.Enayati, The effect of grain size and martensitic transformation on the wear behavior of AISI 304L stainless steel, Materials and Design, 64, 2014, pp. 56-62. https://doi.org/10.1016/j.matdes.2014.07.022
135. H. Ashrafi, M. H. Enayati, R. Emadi, Nanocrystalline Al/Al12(Fe,V)3Si alloy prepared by mechanical alloying: Synthesis and thermodynamic analysis, Advanced Powder Technology, 25, 2014, pp. 1483-1491. https://doi.org/10.1016/j.apt.2014.04.003
134. M. Jafari, M. H. Enayati, M. Salehi, S. M. Nahvi, C. G. Park, Microstructural evolution of nanosized tungsten carbide during heatup stage of sintering of electroless nickel-coated nanostructured WC–Co powder, Ceramics International, 40, 2014, pp. 11031-11039. https://doi.org/10.1016/j.ceramint.2014.03.118
133. H. Ashrafi, R. Emadi, M. H. Enayati, Fabrication and characterization of nanocrystalline Al/Al12(Fe,V)3Si alloys by consolidation of mechanically alloyed powders, International Journal of Minerals, Metallurgy and Materials, 21, 2014, pp. 711-719. https://doi.org/10.1007/s12613-014-0962-1
132. S.Z.Anvari, N.Yazdian, F.Karimzadeh, M.H. Enayati, Effects of micro and macro alloying on the formation and thermal stability of nanocrystalline L12-Al3V, Journal of Materials Engineering and Performance, 23, 2014, pp. 1173-1181. https://doi.org/10.1007/s11665-014-0862-6
131. S.N. Hosseini, M.H. Enayati, F. Karimzadeh, Nano-scale grain growth behavior of CoAl intermetallic synthesized by mechanical alloying, Bulletin of Materials Science, 37, 2014, pp. 383-387. https://doi.org/10.1007/s12034-014-0672-3
130. E. Parvazian, F. Karimzadeh, M. H. Enayati, Photovoltaic characterization and electrochemical impedance spectroscopy analysis of dye-sensitized solar cells based on the composite of TiO2 -MWCNT photoelectrodes, Journal of Electronic Materials,43, 2014, pp. 1450-1459. https://doi.org/10.1007/s11664-014-3102-9
129. S. Sabooni, F. Karimzadeh, M. H. Enayati, Thermal stability study of ultrafine grained 304L stainless steel produced by martensitic process, Journal of Materials Engineering and Performance, 23, 2014, pp. 1665-1672. https://doi.org/10.1007/s11665-014-0924-9
128. H. Ashrafi, M. H. Enayati, R. Emadi, Mechanical properties and thermal stability of nanostructured Al/Al12(Fe,V)3Si alloys produced by powder metallurgy, Journal of Materials Engineering and Performance, 23, 2014, pp. 1780-1789. https://doi.org/10.1007/s11665-014-0920-0
127. A. Atrian, G.H. Majzoobi, M.H. Enayati, M. Bakhtiari, Mechanical and microstructural characterization of Al7075/SiC nanocomposite fabricated by dynamic compaction, International Journal of Minerals, Metallurgy and Materials, 21, 2014, pp. 295-303. https://doi.org/10.1007/s12613-014-0908-7
126. Y. Mazaheri, F. Karimzadeh, M.H. Enayati, Tribological behavior of A356/Al2O3 surface nanocomposite prepared by friction stir processing, Metallurgical and Materials Transactions A, 45, 2014, pp. 2250-2259. https://doi.org/10.1007/s11661-013-2140-x
125. E. Dastanpoor, M.H. Enayati, F. Karimzadeh, Synthesis of Cu-Zr-Al/Al2O3 amorphous nanocomposite by mechanical alloying, Advanced Powder Technology, 25, 2014, pp. 519-523. https://doi.org/10.1016/j.apt.2013.08.006
124. S.E. Aghili, M.H. Enayati, F. Karimzadeh, Synthesis of (Fe,Cr)3Al-Al2O3 nanocomposite through mechanochemical combustion reaction induced by ball milling of Cr, Al and Fe2O3 powders, Advanced Powder Technology, 25, 2014, pp. 408-414. https://doi.org/10.1016/j.apt.2013.06.006
123. M. Rafiei, M.H. Enayati, F. Karimzadeh, Kinetic analysis of thermite reaction in Al-Ti-Fe2O3 system to produce (Fe,Ti)3Al-Al2O3 nanocomposite, Powder Technology,253, 2014, pp. 553-560. https://doi.org/10.1016/j.powtec.2013.12.028
122. R. Nafar Dehsorkhi a, S.Sabooni, F.Karimzadeh, A.Rezaeian, M.H.Enayati, Study on the wear behavior of ultrafine grained 304L stainless steel, Advanced Materials Research, 829, 2014, pp 177-181. DOI: 10.4028/www.scientific.net/AMR.829.177
121. M. Mohammadnezhad, M. Shamanian, M.H. Enayati, M. Salehi, A. Hoseynian, Microstructures and properties of NiAl-TiC nanocomposite coatings on carbon steel surfaces produced by mechanical alloying technique, Surface and Coatings Technology, 238, 2014, pp. 180-187. https://doi.org/10.1016/j.surfcoat.2013.10.071
120. M.H. Enayati, F. Karimzadeh, M. Jafari, A. Markazi, A. Tahvilian, Microstructural and wear characteristics of HVOF-sprayed nanocrystalline NiAl coating, Wear, 309, 2014, pp. 192-199. https://doi.org/10.1016/j.wear.2013.10.015
119. M. Tavoosi, F. Karimzadeh, M. H. Enayati, S. Lee, H. S. Kim, Kinetic study of non-isothermal crystallization in Al80Fe10Ti5Ni5 metallic glass, Metals and Materials International, 19, 2013, pp. 901-906. https://doi.org/10.1007/s12540-013-5001-7
118. M. Jafari, M.H. Enayati, M. Salehi, S.M. Nahvi, C.G. Park, Improvement in tribological properties of HVOF sprayed WC-Co coatings using electroless Ni-P coated feedstock powders, Surface & Coatings Technology, 235, 2013, pp. 310-317. https://doi.org/10.1016/j.surfcoat.2013.07.059
117. A. Shirani Bidabadi, M.H. Enayati, E. Dastanpoor, R.A. Varin, M. Biglari, Nanocrystalline intermetallic compounds in the Ni-Al-Cr system synthesized by mechanical alloying and their thermodynamic analysis, Journal of Alloys and Compounds, 581, 2013, pp. 91-100. https://doi.org/10.1016/j.jallcom.2013.07.037
116. P. Salehikahrizsangi, F. Karimzadeh, M.H. Enayati, M.H. Abbasi, Investigation of the effects of grain size and nano-sized reinforcements on tribological properties of Ti6Al4V alloy, Wear, 305, 2013, pp. 51-57. https://doi.org/10.1016/j.wear.2013.05.008
115. S. Azadehranjbar, F. Karimzadeh, M.H. Enayati, N. Mahmoodi, Properties of bulk Fe-Ni/CNT nanocomposites prepared by mechanical milling and sintering, International Journal of Modern Physics B (IJMPB), 27, 2013, pp. 13501021-9. https://doi.org/10.1142/S0217979213501026
114. A. Shahcheraghi, F. Dehghani, K. Raeissi, A. Saatchi, M.H. Enayati, Effects of TiO2 additive on electrochemical hydrogen storage properties of nanocrystalline/amorphous Mg2Ni intermetallic alloy, Iranian Journal of Materials Science & Engineering, 10, 2013, pp. 1-9.
113. S.R. Anvari, F. Karimzadeh, M.H. Enayati, Wear characteristics of Al-Cr-O surface nano-composite layer fabricated on Al6061 plate by friction stir processing, Wear, 304, 2013, pp. 144-151. https://doi.org/10.1016/j.wear.2013.03.014
112. M. Jafari, M.H. Enayati, M. Salehi, S.M. Nahvi, C.G. Park, Microstructural and mechanical characterizations of a novel HVOF-sprayed WC-Co coating deposited from electroless Ni-P coated WC-12Co powder, Materials Science & Engineering A, 578, 2013, pp. 46-53. https://doi.org/10.1016/j.msea.2013.04.064
111. M. H. Enayati, E. Dastanpoor, Comparative Study of Mechanical Alloying Induced Nanocrystallization and Amorphization in Ni-Nb and Ni-Zr Systems, Metallurgical and Materials Transactions A, 44, 2013, pp. 3984-3998. https://doi.org/10.1007/s11661-013-1717-8
110. M. Jafari, M. H. Enayati, M. Salehi, S. M. Nahvi, C. G. Park, Comparison between oxidation kinetics of HVOF sprayed WC-12Co and WC-10Co-4Cr coatings, International Journal of Refractory Metals and Hard Materials, 41, 2013, pp. 78-84. https://doi.org/10.1016/j.ijrmhm.2013.02.006
109. S.R. Anvari, F. Karimzadeh, M. H. Enayati, A novel route for development of Al-Cr-O surface nano-composite by friction stir processing, Journal of Alloys and Compounds, 562, 2013, pp. 48-55. https://doi.org/10.1016/j.jallcom.2013.01.161
108. Y. Mazaheri, F. Karimzadeh, M.H. Enayati, Development of Al356-Al2O3 nanocomposite coatings by high velocity oxy-fuel technique, Journal of Materials Science & Technology, 29, 2013, pp. 813-820. https://doi.org/10.1016/j.jmst.2013.05.019
107. M. Rafiei, M.H. Enayati, F. Karimzadeh, Thermodynamic analysis of solid solution formation in nanocrystalline Fe-Ti-Al ternary system during mechanical alloying, Journal of Chemical Thermodynamics, 59, 2013, pp. 243-249. https://doi.org/10.1016/j.jct.2012.12.008
106. M. Mohammadnezhad, M. Shamanian, M.H. Enayati, Influence of annealing temperature on the structure and properties of the nanograined NiAl intermetallic coatings produced by using mechanical alloying, Surface and Coatings Technology, 217, 2013, pp. 64-69. https://doi.org/10.1016/j.surfcoat.2012.11.073
105. M. Mohammadnezhad, M. Shamanian, M.H. Enayati, M.Salehi, Effect of process parameters on the formation of nanostructured Ni-Al coating on carbon steel by using mechanical alloying, Iranian Journal of Surface Science and Engineering, 15, 2013, pp.49-57.
104. M. Tavoosi, F. Karimzadeh, M.H. Enayati, Formation and characterization of amorphous–nanocrystalline Al80Fe10M10 [M = Fe, Nb, Ti, Ni, (Ni0.5Ti0.5)] alloys, Journal of Alloys and Compounds, 551, 2013, pp. 584-590. https://doi.org/10.1016/j.jallcom.2012.11.038
103. N. Yazdian, F. Karimzadeh, M.H. Enayati, In-situ fabrication of Al3V/Al2O3 nanocomposite through mechanochemical synthesis and evaluation of its mechanism, Advanced Powder Technology, 24, 2013, pp. 106-112. https://doi.org/10.1016/j.apt.2012.03.004
102. P. Ashtijoo, A. Mahboubi Soufiani, M. Shamanian, M.H. Enayati, Fabrication of coating from Ti-Al-C on Ti substrate by means of mechanical alloying, Journal of Iranian Society of Metallurgical Engineers, No. 46, 2012, pp. 58-62.
101. M. Mohammadnezhad, M. Shamanian, M.H. Enayati, Formation of nanostructured NiAl coating on carbon steel by using mechanical alloying, Applied Surface Science, 263, 2012, pp. 730-736. https://doi.org/10.1016/j.apsusc.2012.09.151
100. M. Tavoosi, F. Karimzadeh, M.H. Enayati, H.S. Kim, Metastable phases in Al80Fe10Ti5Ni5 alloy fabricated by non-equilibrium processes, Materials Transactions, 53, 2012, pp. 1739-1743.https://doi.org/10.2320/matertrans.M2012061
99. B. Movahedi, M. Salehi, M.H. Enayati, Development of thermal spray nanocrystalline coatings by devitrification of amorphous phase, Iranian Journal of Surface Science and Engineering, 13, 2012, pp.71-78.
98. N. Hosseini, F. Karimzadeh, M.H. Abbasi, M.H. Enayati, A comparative study on the wear properties of coarse-grained Al6061alloy and nanostructured Al6061–Al2O3 composites, Tribology International, 54, 2012, pp. 58–67. https://doi.org/10.1016/j.triboint.2012.04.020
97. S.N. Hosseini, F. Karimzadeh, M.H. Enayati, Development and characterization of CoAl-Al2O3 intermetallic matrix nanocomposite, Materials Chemistry and Physics, , 136, 2012, pp. 341-346.https://doi.org/10.1016/j.matchemphys.2012.06.030
96. Z. Adabavazeh, F. Karimzadeh, M.H. Enayati, Thermodynamic analysis of (Ni, Fe)3Al formation by mechanical alloying, Journal of Chemical Thermodynamics, 54, 2012, pp. 406-411. https://doi.org/10.1016/j.jct.2012.05.027
95. A. Mahboubi Soufiani, F. Karimzadeh, M.H. Enayati, The effect of type of atmospheric gas on milling behavior of nanostructured Ti6Al4V alloy, Advanced Powder Technology, 23, 2012, pp. 264-267. https://doi.org/10.1016/j.apt.2012.01.003
94. Z. Adabavazeh, F. Karimzadeh, M.H. Enayati, Mechanochemical behaviour of NiO-Al-Fe powder mixtures to produce (Ni, Fe)3Al-Al2O3 nanocomposite powder, Metallurgical and Materials Transactions A, 43A, 2012, pp. 3359-3365. https://doi.org/10.1007/s11661-012-1138-0
93. S.E. Aghili, M.H. Enayati, F. Karimzadeh, In-situ synthesis of alumina reinforced (Fe,Cr)3Al intermetallic matrix nanocomposite, Materials and Manufacturing Processes, 27, 2012, pp. 1348-1353. https://doi.org/10.1080/10426914.2012.663141
92. Z. Adabavazeh, F. Karimzadeh, M.H. Enayati, Formation mechanism of nanostructured (Ni, Fe)3Al-Al2O3 nanocomposite and its characterization, Materials and Manufacturing Processes, 27, 2012, 626-630. https://doi.org/10.1080/10426914.2011.593249
91. S.E. Aghili, M.H. Enayati, F. Karimzadeh, Synthesis of nanocrystalline (Fe,Cr)3Al powder by mechanical alloying, Materials and Manufacturing Processes, 27, 2012, pp. 467-471. https://doi.org/10.1080/10426914.2011.585501
90. S. Azadehranjbar, F. Karimzadeh, M.H. Enayati, Development of NiFe-CNT and Ni3Fe-CNT nanocomposites by mechanical alloying, Advanced Powder Technology, 23, 2012, pp. 338-342. https://doi.org/10.1016/j.apt.2011.04.013
89. S.N. Hosseini, F. Karimzadeh, M.H. Enayati, Mechanochemical synthesis of Al2O3/Co nanocomposite by aluminothermic reaction, Advanced Powder Technology, 23, 2012, pp. 334-337. https://doi.org/10.1016/j.apt.2011.04.008
88. Z. Adabavazeh, F. Karimzadeh, M.H. Enayati, Synthesis and structural characterization of nanocrystalline (Ni, Fe)3Al intermetallic compound prepared by mechanical alloying, Advanced Powder Technology, 23, 2012, pp. 284-289. https://doi.org/10.1016/j.apt.2011.03.012
87. M. Jafari, M.H. Abbasi, M.H. Enayati, F. Karimzadeh, Mechanical properties of nanostructured Al2024-MWCNT composite prepared by optimized mechanical milling and hot pressing methods, Advanced Powder Technology, 23, 2012, pp. 205-210. https://doi.org/10.1016/j.apt.2011.02.008
86. A. Mahboubi Soufiani, F. Karimzadeh, M.H. Enayati, Formation mechanism and characterization of nanostructured Ti6Al4V alloy prepared by mechanical alloying, Materials and Design, 37, 2012, pp. 152-160. https://doi.org/10.1016/j.matdes.2011.12.044
85. Y. Mazaheri, F. Karimzadeh, M.H. Enayati, A novel technique for development of A356/Al2O3 surface nanocomposite by friction stir processing, Journal of Materials Processing Technology, 211, 2011, pp. 1614-1619. https://doi.org/10.1016/j.jmatprotec.2011.04.015
84. Z. Sadeghian, B. Lotfi, M.H. Enayati, P. Beiss, Microstructural and mechanical evaluation of Al-TiB2 nanostructured composite fabricated by mechanical alloying, Journal of Alloys and Compounds, 509, 2011, pp. 7758-7763. https://doi.org/10.1016/j.jallcom.2011.04.145
83. A. R. Shirani-Bidabadi, A. Shokuhfar, M. H. Enayati. M. Biglari, In-situ fabrication and characterization of (NiCr)Al-Al2O3 nanocomposite by mechanical alloying, Journal of Nano Research, 16, 2011. pp. 21-27. DOI: 10.4028/www.scientific.net/JNanoR.16.21
82. A. Foroozmehr, M.H. Enayati, F. Karimzadeh, Austenite-Martensite transformation in nanostructured AISI316L stainless steel powder induced during mechanical milling, Journal of Materials Science and Engineering with Advanced Technology, 4, 2011, pp. 93-105.
81. M. Tavoosi, F. Karimzadeh, M. H. Enayati, S.-H. Joo and H. S. Kim, Amorphous phase formation in Al80Fe10M10 (M = Ni, Ti, and V) ternary systems by mechanical alloying, Journal of Materials Science, 46, 2011, pp. 7633-7638. https://doi.org/10.1007/s10853-011-5741-z
80. S.N. Hosseini, T. Mousavi, F. Karimzadeh, M.H. Enayati, Thermodynamic aspects of nanostructured CoAl intermetallic compound during mechanical alloying, Journal of Materials Science and Technology, 27, 2011, pp. 601-606. https://doi.org/10.1016/S1005-0302(11)60114-X
79. M. Tavoosi, M.H. Enayati, F. Karimzadeh, Formation and crystallization of an amorphous Al80Fe10Ti5Ni3B2 alloy, Metals and Materials International, 17, 2011, pp. 853-856. https://doi.org/10.1007/s12540-011-1025-z
78. A. Ebnonnasir, F. Karimzadeh, M.H. Enayati, Novel artificial neural network model for evaluating hardness of stir zone of submerge friction stir processed Al-6061-T6 plate, Materials Science and Technology, 27, 2011, pp. 990-995. https://doi.org/10.1179/174328409X425290
77. N. Hosseini, F. Karimzadeh, M.H. Abbasi, M.H. Enayati, Fabrication and characterization of nanostructured Al6061 alloy and its aging behavior, International Journal of Modern Physics B, 25, 2011, pp. 265-275. https://doi.org/10.1142/S0217979211054975
76. S. Azadehranjbar, F. Karimzadeh, M.H. Enayati, Synthesis and characterization of nanocrystalline FeNi and Ni3Fe alloys, International Journal of Modern Physics B (IJMPB), 25, 2011, pp. 1013-1019. https://doi.org/10.1142/S0217979211058377
75. Z. Sadeghian, M.H. Enayati, P. Beiss, Characterization of in situ Al-TiB2 nanocomposite powder synthesized by mechanical alloying, Powder Metallurgy, 54, 2011, pp. 46-49. https://doi.org/10.1179/174329009X409615
74. E. Mohammad Sharifi, F. Karimzadeh, M.H. Enayati, Fabrication and evaluation of mechanical and tribological properties of boron carbide reinforced aluminum matrix nanocomposites, Materials and Design, 32, 2011, pp. 3263-3271. https://doi.org/10.1016/j.matdes.2011.02.033
73. E. Mohammad Sharifi, F. Karimzadeh, M.H. Enayati, Preparation of Al2O3–TiB2 nanocomposite powder by mechanochemical reaction between Al, B2O3 and Ti, Advanced Powder Technology, 22, 2011, pp. 526-531. https://doi.org/10.1016/j.apt.2010.07.010
72. M. Tavoosi, M.H. Enayati, F. Karimzadeh, Crystallization process of the Al80Fe10Ti10 amorphous phase, Powder Metallurgy, 54, 2011, pp. 445-449. https://doi.org/10.1179/003258910X12827272082461
71. A. Heidarpour, F. Karimzadeh, M.H. Enayati, Fabrication and characterization of Al2O3/MO nanocomposite by mechanical alloying and sintering, Powder Metallurgy, 54, 2011, pp. 513-517. https://doi.org/10.1179/003258910X12740974839585
70. E. Mohammad Sharifi, F. Karimzadeh, M.H. Enayati, Mechanochemical assisted synthesis of B4C nanoparticles, Advanced Powder Technology, 22, 2011, pp. 354-358. https://doi.org/10.1016/j.apt.2010.05.002
69. M.H. Enayati, F. Karimzadeh, M. Tavoosi, B. Movahedi, A. Tahvilian, Nanocrystalline NiAl coating prepared by HVOF thermal spraying, Journal of Thermal Spray Technology, 20, 2011, pp. 440-446. https://doi.org/10.1007/s11666-010-9588-7
68. B. Zahmatkesh, M.H. Enayati, A novel approach for development of surface nanocomposite by friction stir processing, Materials Science and Engineering A, 527, 2010, pp. 6734-6740. https://doi.org/10.1016/j.msea.2010.07.024
67. A. Zomorodian, M.H. Fathi, M.H. Enayati, E. Mohamadizahrani, The effect of plasma spray current on the characterizations and properties of HA-Nb composite coatings and corrosion behavior of 316L substrate, Iranian Journal of Surface Science and Engineering, 9, 2010, pp.78-89.
66. Y. Mazaheri, F. Karimzadeh, M.H. Enayati, Nanoindentation study of Al356-Al2O3 nanocomposite prepared by ball milling, Materials Sciences and Applications, 1, 2010, pp. 217-222. DOI: 10.4236/msa.2010.14034
65. M.A. Sheikholeslam, K. Raeissi, M.H. Enayati, Study on corrosion behaviour of nanocrystalline and amorphous Co-P electrodeposits, Transactions of the Institute of Metal Finishing, 88(6), 2010, pp. 324-329. https://doi.org/10.1179/002029610X12772943945944
64. E. Mohammad Sharifi, F. Karimzadeh, M.H. Enayati, Synthesis of titanium diboride reinforced alumina matrix nanocomposite by mechanochemical reaction of Al-TiO2-B2O3, Journal of Alloys and Compounds, 502, 2010, pp. 508-512. https://doi.org/10.1016/j.jallcom.2010.04.207
63. N. Hosseini, F. Karimzadeh, M.H. Abbasi, M.H. Enayati, Tribological properties of Al6061-Al2O3 nanocomposite prepared by milling and hot pressing, Materials and Design, 31, 2010, pp. 4777-4785. https://doi.org/10.1016/j.matdes.2010.05.001
62. B. Zahmatkesh, M.H. Enayati, F. Karimzadeh, Tribological and microstructural evaluation of friction stir processed Al2024 alloy, Materials and Design, 31, 2010, pp. 4891-4896. https://doi.org/10.1016/j.matdes.2010.04.054
61. B. Movahedi, M.H. Enayati, C.C. Wong, Study on nanocrystallisation and amorphisation in Fe-Cr-Mo-B-P-Si-C system during mechanical alloying, Materials Science and Engineering B, 172, 2010, pp. 50-54. https://doi.org/10.1016/j.mseb.2010.04.016
60. M. Babashahi, M.H. Enayati, M. Salehi, M. Monshi, Phase transformation of silicon and silica during ball milling, Journal of Advanced Materials in Engineering, 29, 2010, pp. 1-8.
59. B. Movahedi, M.H. Enayati, C.C. Wong, Structural and thermal behavior of Fe-Cr-Mo-P-B-C-Si amorphous and nanocrystalline HVOF coatings, Journal of Thermal Spray Technology, 19, 2010, pp. 1093-1099. https://doi.org/10.1007/s10853-010-4490-8
58. M. Rafiei, M.H. Enayati, F. Karimzadeh, The effect of Ti addition on alloying and formation of nanocrystalline structure in Fe-Al system, Journal of Materials Science, 45, 2010, pp. 4058-4062. https://doi.org/10.1007/s10853-010-4490-8
57. A. Mahboubi Soufiani, M.H. Enayati, F. Karimzadeh, Mechanical alloying behavior of Ti6Al4V residual scraps with addition of Al2O3 to produce nanostructured powder, Materials and Design, 31, 2010, pp. 3954-3959. https://doi.org/10.1016/j.matdes.2010.03.037
56. B. Movahedi, M.H. Enayati, C.C. Wong, On the crystallization behavior of amorphous Fe-Cr-Mo-B-P-Si-C powder prepared by mechanical alloying, Materials letters, 64, 2010, pp. 1055-1058. https://doi.org/10.1016/j.matlet.2010.02.008
55. A. Mahboubi Soufiani, M.H. Enayati, F. Karimzadeh, Fabrication and characterization of nanostructured Ti6Al4V powder from machining scraps, Advanced Powder Technology, 21, 2010, pp. 336-340. https://doi.org/10.1016/j.apt.2009.12.018
54. E. Mohammad Sharifi, F. Karimzadeh, M.H. Enayati, Mechanochemically synthesized Al2O3-TiC nanocomposite, Journal of Alloys and Compounds, 491, 2010, pp. 411-415. https://doi.org/10.1016/j.jallcom.2009.10.206
53. M. Jalaly, M.H. Enayati, P. Kameli, F. Karimzadeh, Effect of composition on structural and magnetic properties of nanocrystalline ball milled Ni1-xZnxFe2O4 ferrite, Physica B: Condensed Matter, 405, 2010, pp. 507-512. https://doi.org/10.1016/j.physb.2009.09.044
52. M. Jalaly, M.H. Enayati, P. Kameli, F. Karimzadeh, Synthesis, grain growth, Cu-doping and magnetic properties of nanocrystalline Ni-Zn ferrite, International Journal of Modern Physics B, 24, 2010, pp. 1067-1077. https://doi.org/10.1142/S0217979210054956
51. M. Jafari, M.H. Enayati, M.H. Abbasi, F. Karimzadeh, Compressive and wear behaviors of bulk nanostructured Al2024 alloy, Materials and Design, 31, 2010, pp. 663-669. https://doi.org/10.1016/j.matdes.2009.08.020
50. M. Tavoosi, F. Karimzadeh, M.H. Enayati, Wear behavior of Al-Al2O3 nanocomposites prepared by mechanical alloying and hot pressing, Materials Science and Technology, 26, 2010, pp. 1114-1119. https://doi.org/10.1179/174328409X459329
49. M. Khodaei, M.H. Enayati, F. Karimzadeh,The structure and mechanical properties of Fe3Al–30 vol.% Al2O3 nanocomposite, Journal of Alloys and Compounds, 488, 2009, pp. 134-137. https://doi.org/10.1016/j.jallcom.2009.09.005
48. M. Rafiei, M.H. Enayati, F. Karimzadeh, Mechanochemical synthesis of (Fe,Ti)3Al-Al2O3 nanocomposite, Journal of Alloys and Compounds, 488, 2009, pp. 144-147 https://doi.org/10.1016/j.jallcom.2009.09.007
47. N. Hosseini, M.H. Abbasi, F. Karimzadeh, M.H. Enayati, Structural evolution and grain growth kinetics during isothermal heat treatment of nanostructured Al6061, Materials Science & Engineering A, 525, 2009, pp. 107-111. https://doi.org/10.1016/j.msea.2009.06.051
46. E. Mohammad Sharifi, F. Karimzadeh, M.H. Enayati, Fabrication of aluminum matrix hybrid nanocomposite by mechanical alloying, International Journal of Modern Physics B (IJMPB), vol. 23, No. 23, 2009, pp. 4825-4832. https://doi.org/10.1142/S0217979209053412
45. E. Mohammad Sharifi, F. Karimzadeh, M.H. Enayati, A study on mechanochemical behavior of B2O3-Al system to produce alumina-based nanocomposite, Journal of Alloys and Compounds, 482, 2009, pp. 110-113. https://doi.org/10.1016/j.jallcom.2009.04.051
44. M. Rafiei, M.H. Enayati, F. Karimzadeh, Characterization and formation mechanism of nanocrystalline (Fe,Ti)3Al intermetallic compound prepared by mechanical alloying, Journal of Alloys and Compounds, 480, 2009, pp. 392-396. https://doi.org/10.1016/j.jallcom.2009.02.072
43. M. Jalaly, M.H. Enayati, F. Karimzadeh, Investigation of structural and magnetic properties of nanocrystalline Ni0.3Zn0.7Fe2O4 prepared by high energy ball milling, Journal of Alloys and Compounds, 480, 2009, pp. 737-740. https://doi.org/10.1016/j.jallcom.2009.02.042
42. M. Jalaly, M.H. Enayati, F. Karimzadeh, P. Kameli, Mechanosynthesis of nanostructured magnetic Ni-Zn ferrite, Powder Technology, 193, 2009, pp. 150-153. https://doi.org/10.1016/j.powtec.2009.03.008
41. Z. Sadeghian, M.H. Enayati, P. Beiss, In situ production of Al-TiB2 nanocomposite by double step mechanical alloying, Journal of Materials Science, 44, 2009, pp. 2566-2572. https://doi.org/10.1007/s10853-009-3335-9
40. N. Forouzanmehr, F. Karimzadeh, M.H. Enayati, Synthesis and characterization of TiAl/-Al2O3 nanocomposite by mechanical alloying, Journal of Alloys and Compounds, 478, 2009, pp. 257-259. https://doi.org/10.1016/j.jallcom.2008.12.047
39. S.M. Hashemi, M.H. Enayati, M.H. Fathi, Plasma spray coatings of Ni-Al-SiC composite, Journal of Thermal Spray Technology, 18, 2009, pp. 284-291. https://doi.org/10.1007/s11666-009-9296-3
38. M. Jafari, M.H. Enayati, M.H. Abbasi, F. Karimzadeh, Thermal stability and structural changes during heat treatment of nanostructured Al2024 alloy, Journal of Alloys and Compounds, 478, 2009, pp. 260-264. https://doi.org/10.1016/j.jallcom.2008.12.017
37. A. Heidarpour, F. Karimzadeh, M.H. Enayati, In situ synthesis mechanism of Al2O3-Mo nanocomposite by ball milling process, Journal of Alloys and Compounds, 477, 2009, pp. 692-695. https://doi.org/10.1016/j.jallcom.2008.10.112
36. S.Z. Anvari, F. Karimzadeh, M.H. Enayati, Synthesis and characterization of NiAl-Al2O3 nanocomposite powder by mechanical alloying, Journal of Alloys and Compounds, 477, 2009, pp. 178-181. https://doi.org/10.1016/j.jallcom.2008.10.043
35. M.H. Enayati, M.H. Fathi, A. Zomorodian, Characterization and corrosion properties of novel hydroxyapatite-niobium plasma sprayed coating, Surface Engineering, vol. 25, No. 4, 2009, pp. 338-342. https://doi.org/10.1179/026708408X341214
34. M. Tavoosi, F. Karimzadeh, M.H. Enayati, Bulk Al-Zn/Al2O3 nanocomposite prepared by reactive milling and hot pressing methods, Journal of Alloys and Compounds, 475, 2009, pp. 198-201. https://doi.org/10.1016/j.jallcom.2008.07.049
33. M.H. Enayati, G.R. Aryanpour, A. Ebnonnasir, Production of nanostructured WC-Co powder by ball milling, International Journal of Refractory Metals and Hard Materials, 27, 2009, pp. 159-163. https://doi.org/10.1016/j.ijrmhm.2008.06.005
32. N. Forouzanmehr, F. Karimzadeh, M.H. Enayati, Study on solid state reactions of nanocrystalline TiAl synthesized by mechanical alloying, Journal of Alloys and Compounds, 471, 2009, pp. 93-97. https://doi.org/10.1016/j.jallcom.2008.03.121
31. M. Khodaei, M.H. Enayati, F. Karimzadeh, Mechanochemically synthesized Fe3Al-Al2O3 nanocomposite, Journal of Alloys and Compounds, 467, 2009, pp 159-162. https://doi.org/10.1016/j.jallcom.2007.11.123
30. M. Rastgoo Sisakht , S. Nouri Khorasani, M.H. Enayati, A. Zadhoush, Theoritical and experimental determination of tensile properties of nano-sized and micron-sized CaCO3/PA66 composite, Polymer Composites, 30, 2009, pp. 274-280. DOI: 10.1002/pc.20602
29. B. Movahedi, M.H. Enayati, M. Salehi, Thermal spray coatings of Ni-10wt.%Al composite powder synthesis by low energy mechanical milling, Surface Engineering, vol. 25, No. 4, 2009, pp. 276-283. https://doi.org/10.1179/174329408X281830
28. M. Khodaei, F. Karimzadeh, M.H. Enayati, Fabrication of iron-alumina nanocomposite powder by high energy ball milling of hematite-aluminum powder mixture, International Journal of Modern Physics B (IJMPB), vol. 22, No. 18/19, 2008, pp. 3233-3236. https://doi.org/10.1142/S0217979208048152
27. T. Mousavi, M.H. Abbasi, F. Karimzadeh, M.H. Enayati, Heat treatment effects on structure and properties of synthesized nanocrystalline NiTi intermetallic by mechanical alloying, International Journal of Modern Physics B (IJMPB), vol. 22, No. 18/19, 2008, pp. 2970-2978. https://doi.org/10.1142/S0217979208047821
26. M.A. Sheikholeslam, M.H. Enayati, K. Raeissi, Characterization of nanocrystalline and amorphous cobalt-phosphorous electrodeposits, Materials Letters, 62, 2008, pp. 3629-3631. https://doi.org/10.1016/j.matlet.2008.04.023
25. T. Mousavi, F. Karimzadeh, M.H. Abbasi, M.H. Enayati, Investigation of Ni nanocrystallization and the effect of Al2O3 addition by high-energy ball milling, Journal of Materials Processing Technology, 204, 2008, pp. 125-129. https://doi.org/10.1016/j.jmatprotec.2007.10.077
24. T. Mousavi, M.H. Abbasi, F. Karimzadeh, M.H. Enayati, Formation mechanism and enthalpy of mixing of nanocrystalline NiTi intermetallic during mechanical alloying, Esteghlal, vol. 26, No. 2, 2008, pp. 59-70.
23. M. Tavoosi, M.H. Enayati, F. Karimzadeh, Softening behaviour of nanostructured Al-14wt%Zn alloy during mechanical alloying, Journal of Alloys and Compounds, 464, 2008, pp. 107-110. https://doi.org/10.1016/j.jallcom.2007.09.119
22. M.H. Enayati, F. Karimzadeh, S.Z. Anvari, Synthesis of nanocrystalline NiAl by mechanical alloying, Journal of Materials Processing Technology, 200, 2008, pp. 312-315. https://doi.org/10.1016/j.jmatprotec.2007.09.023
21. F. Karimzadeh, M.H. Enayati, M. Tavoosi, Synthesize and characterization of Zn/Al2O3 nanocomposite by mechanical alloying, Materials Science and Engineering A, 486, 2008, pp. 45-48. https://doi.org/10.1016/j.msea.2007.08.059
20. M. Khodaei, M.H. Enayati, F. Karimzadeh, Mechanochemical behaviour of Fe2O3-Al-Fe powder mixtures to produce Fe3Al–Al2O3 nanocomposite powder, Journal of Materials Science, 43, 2008, pp. 132-138. https://doi.org/10.1007/s10853-007-2123-7
19. M. Tavoosi, F. Karimzadeh, M.H. Enayati, Fabrication of Al-Zn/α-Al2O3 nanocomposite by mechanical alloying, Materials Letters, 62, 2008, pp. 282-285. https://doi.org/10.1016/j.matlet.2007.05.017
18. M.H. Enayati, M.R. Bafandeh, Phase transitions in nanostructured Fe-Cr-Ni alloys prepared by mechanical alloying, Journal of Alloys and Compounds, 454, 2008, pp. 228-232. https://doi.org/10.1016/j.jallcom.2007.03.064
17. M.H. Enayati, M. Seyed-Salehi, A. Sonboli, Development of Fe3C, SiC and Al4C3 compounds during mechanical alloying, Journal of Materials Science, 42, 2007, pp. 5911-5914. https://doi.org/10.1007/s10853-007-1736-1
16. M. Zakeri, R. Yazdani-Rad, M.H. Enayati, M.R. Rahimipour, I. Mobasherpour, Mechanochemical reduction of MoO3/SiO2 powder mixtures by Al and carbon for the synthesis of nanocrystalline MoSi2, Journal of Alloys and Compounds, 430, 2007, pp. 170-174. https://doi.org/10.1016/j.jallcom.2006.05.016
15. M.H. Enayati, M. Salehi, An investigation of the use of Ni3Al intermetallic compound for fabrication of Al matrix composites, Esteghlal, vol.25, No.2, 2007, pp. 183-190.
14. M.H. Enayati, M.R. Bafandeh, S. Nosohian, Ball milling of stainless steel scrap chips to produce nanocrystalline powder, Journal of Materials Science, 42, 2007, pp. 2844-2848. https://doi.org/10.1007/s10853-006-1371-2
13. M. Zakeri, R. Yazdani-Rad, M.H. Enayati, M.R. Rahimipour, Synthesis of MoSi2–Al2O3 nanocomposite by mechanical alloying, Materials Science and Engineering A, 430, 2006, pp. 185-188. https://doi.org/10.1016/j.msea.2006.05.112
12. M.H. Enayati, The synthesis of nanocrystalline Ni and Nb powders, International Journal of Nanoscience and Nanotechnology, 1, 2005, pp. 1-7.
11. M. Zakeri, R. Yazdani-Rad, M.H. Enayati, M.R. Rahimipour, Synthesis of nanocrystalline MoSi2 by mechanical alloying, Journal of Alloys and Compounds, 403, 2005, pp. 258–261. https://doi.org/10.1016/j.jallcom.2005.06.003
10. M.H. Enayati, M. Salehi, Formation mechanism of Fe3Al and FeAl intermetallic compounds during mechanical alloying, Journal of Materials Science, 40, 2005, pp. 3933-3938. https://doi.org/10.1007/s10853-005-0718-4
9. M.H. Enayati, Z. Rahmani, Fabrication of nanostructured Al-Al4C3 alloys, Archives of Materials Science, vol. 25, No. 4, 2004, pp. 515-521.
8. M.H. Enayati, M. Zakeri, Production of Fe-C powders with improved structure, International Journal of Iron & Steel Society of Iran, vol. 1, No. 1, 2004, pp. 24-28.
7. M.H. Enayati, Z. Sadeghian, M. Salehi, A. Saidi, The effect of milling parameters on the synthesis of Ni3Al intermetallic compound by mechanical alloying, Materials Science and Engineering A, 375-377, 2004, pp. 809-811. https://doi.org/10.1016/j.msea.2003.10.060
6. M.H. Enayati, P. Schumacher, B. Cantor, Amorphization of Ni60Nb20Zr20 alloy by mechanical alloying, Materials Science and Engineering A, 375-377, 2004, pp. 812-814. https://doi.org/10.1016/j.msea.2003.10.061
5. M.H. Enayati, A. Saidi, Z. Sadeghian, Synthesis of Ni3Al intermetallic compound under different mechanical alloying conditions, Journal of School of Engineering , vol. 15, No.1, 2003, pp. 23-33.
4. M.H. Enayati, P. Schumacher, B. Cantor, The structure and thermal stability of mechanically alloyed Ni-Nb-Zr amorphous alloys, Journal of Materials Science, 37, 2002, pp. 5255-5259. https://doi.org/10.1023/A:1021008620711
3. M.H. Enayati, Crystallization behaviour of Ni-Nb amorphous alloys, Scientia Iranica, vol. 9, No. 2, 2002, pp. 157-161.
2. P. Schumacher, M.H. Enayati, B. Cantor, Amorphization kinetics of Ni60Nb40 during mechanical alloying, Journal of Metastable and Nanocrystalline Materials, 2-6, 1999, pp. 351-356. 10.4028/www.scientific.net/MSF.312-314.351
1. M.H. Enayati, I.T.H. Chang, P. Schumacher, B. Cantor, Mechanical alloying of Ni-Nb alloys, Materials Science Forum, 235-238, 1997, pp. 85-90. 10.4028/www.scientific.net/MSF.235-238.85