|
H. Salehi, S. Ziaei-Rad, M.R. Zakerzadeh, M.A.Vaziri Zanjani Smart beam defection behaviour due to two or more SMA wires attachment |
|
H. Talebi Mazraehshahi, H. Zamani, S. Ziaei.Rad An experimental investigation on mechanical properties of basalt composites fabric |
|
R. Tikani, N. Vahdati, S. Ziaei-Rad Effective Reduction of Peak Frequency in Hydraulic Engine Mounts |
|
B. Mortazavi, A. Vahedi, S. Ziaei-Rad, N. Nouri Hybrid Finite Element-Neural Network Method for Prediction of Bucky Paper Elastic Properties |
|
R. Tikani, S. Ziaei-Rad, N. Vahdati, S. Heidari, M. Esfahanian A Novel Double-Notch Passive Hydraulic Mount Design |
|
M.M. Zaeri, S. Ziaei-Rad, F. Karimzadeh Mechanical Modeling of Carbon Nanotubes |
|
R. Tikani, N. Vahdati, S. Ziaei-Rad, M. Esfahanian A New Approach for Double-Notch Frequency Hydraulic Mounts |
|
N. Nouri, S. Ziaei-Rad, A. Vahedi Mechanical Properties Evaluation of Carbon Nanotube Sheets |
|
M. Ghayour, S. Ziaei-Rad, R. Talebitooti, M. Talebitoooti Dynamic Analysis and Critical Speed of Pressurized Rotating Composite Laminated Conical Shells Using Generalized Quadrature Method |
|
M. Talebitooti, R. Talebitoooti M. Ghayour, S. Ziaei-Rad Free Vibration of Rotating Composite Conical Shells with Stringer and Ring Stiffeners |
|
J. Kadkhodapour, A. Butz, A. Prakash, S. Ziaei-Rad Finite element modeling of Martensite grain size effect on localized deformation in dual phase steels |
|
Ali Vahedi, Bohayra Mortazavi, S. Ziaei-Rad A New Multiscale Method for Prediction of Elastic Properties of Bucky Paper in Polymer Nanocomposites |
|
A. Vahedi, B. Hamidi, M. Kamalvand, M. Madhkhan1, M.A.Vaziri, S. Ziaei-Rad Manufacturing of Large Size Nanocomposite Buckypaper Using Vacuum Filtration Technique |
|
M. Kamalvand, M. Madhkhan, B. Hamidi , A. Vahedi, M. A. Vaziri, S. Ziaei-Rad The Effect of Filter Type, Concentration and Type of Carbon Nanotube on the Buckypaper Surface Quality |
|
A. Ariaei, S. Ziaei-Rad, M. Ghayour Critical velocities for beams subjected to moving constant loads |
|
A. Ariaei, S. Ziaei-Rad, M. Ghayour Comparison between DET and FEM in vibration analysis of beams subjected to moving loads |
|
M. Rahimi, S. Ziaei-Rad Worst Specification for Force Vibration Response of Mistuned Bladed Disk |
|
M. Silani, S. Ziaei-Rad, M. Jamshidian Rotor crack detection using pattern search and genetic algorithm |
|
K. Hasanpour, S. Ziaei-Rad Finite Stain Viscoelastic-plastic Deformation of Polymers Using Finite Element Simulation |
|
S. Malek, R. Akbari, S. Ziaei-Rad Estimation of Elastomeric Bridge Shear Modulus using Operational Modal Analysis |
|
S. Maalek, R.Akbari, S. Ziaei-Rad Operational Modal Analysis (OMA) and its applications to experimental vibration analysis of civil engineering structures |
|
K. Hasanpour, S. Ziaei-Rad Finite Element Modeling of Strain-Stiffening in Biaxial Hot Drawing Process of Poly (Ethylene Tetreohthlate) |
|
M. Silani, S. Ziaei-Rad Forced responses and free vibration analysis of rotating systems with one and multi open cracks |
|
S. Maalek, R. Akbari, S. Ziaei-Rad Operational modal analysis of a post-tensioned concrete skew bridge before and after replacement of its elastomeric bearings |
|
S. Adibi, S. Ziaei Rad, F. Karimzadeh Modelling Considerations and Material Properties Evaluation in Analysis of Polymer Carbon-Nanotubes by Using Square Representative Volume Elements |
|
S. Rahmanian, J. Kadkhodapour, S. Ziaei-Rad, A. Kermanpur Thermo-mechanical Analysis and Microstructural Evolution in Hot Strip Rolling |
|
S. Ziaei-Rad, R. Tikani Forced Vibration of Mindlin-Reissner Thick Plate with Layers of Piezoelectric Sensors and Actuators |
|
S. Rahmanian, J. Kadkhodapour, S. Ziaei-Rad, A. Kermanpur Thermo-mechanical Analysis and Microstructural Evolution in Hot Strip Rolling |
|
S. Ziaei-Rad, R. Tikani Vibration Analysis of Thick Plate with Integrated Piezoelectric Patches using finite element method |
|
A. Kermanpur, H. Sepehri-Amin, S. Ziaei-Rad, N. Nourbakhshnia, M. Mosadaghfar Failure characterization of Ti6Al4V gas turbine compressor blades |
|
J. Kadkhodapour, K. Hassanpour, S. Ziaei-Rad, F. Karimzadeh Finite Element Analysis of Tensile Mechanical Properties in Nanocrystaline Materials |
|
M. Mashayekhi, S. Ziaei-Rad, J. Parvizian, H. Hadavinia Evaluation of Fracture in a Three Stage Forging Process Using Continuum Damage Mechanics |
|
M. Olfatnia, M. Salimi, S. Ziaei-Rad Further Investigation on Chatter Analysis in cold rolling mills for Finding Optimum Range of Design |
|
R. Oftadeh , H. Javadi , S. Ziaei-Rad , M. Palhang , A. Sabbaghpour Fard Fabrication of a biped robot and Optimization of its Kinematics Trajectories Based on Relative Coordinates and Bezier Splines |
|
M. Ajoodanian, S. Ziaei-Rad, A. Abdoolahi, H. Ostadi, Singularity Analysis of 3-DOF 4-Legged Parallel Manipulator with a Non-Slippery Passive Constraining Leg |
|
S. Adibi, S. Ziaei-Rad, F. Karimzadeh Finite Element modeling of carbon-nanotubes based composites |
|
M. Jafari, N. Hosseini, S. Aadibi, S. Ziaei Rad, F. Karimzadeh Mechanical Properties Evaluation of Single-Walled Carbon Nanotubes Using Molecular-Dynamics Based Finite Element Approach |
|
S. Ziaei-Rad, A. R. Ariaei Vibration Analysis of Timoshenko Beams Subjected to a Moving Mass and Spring System |
|
S. Ziaei-Rad, M. Silani, , N. Nourbakhshnia Finite Element modelling of stress relief vibratory process |
|
M. Salehi, S. Ziaei Rad Nonlinear Vibration System Identification via the Hilbert Transform |
|
Mashayekhi, S. Ziaei Rad, J. Parvizian, K. Nikbin, H. Hadavinia Influence of Triaxial Stress State on Damage Evolution in Solids |
|
S. Ziaei-Rad, M. Jafari Balancing of Flexible Rotors without Trial Runs Using a Real-Code Genetic Algorithm |
|
S. Ziaei-Rad, M. Jafari Free Vibration and Unbalance Response Analysis of Helicopter Tail-Rotor-Drive Shaft |
|
K. Hassanpour, S. Ziaei Rad Finite Element Modelling of Polypropylene Foam Under Impact Loading |
|
S. Ziaei-Rad, M. Silani Drop Impact Analysis of TV Model and the Effect of Some Design Parameters on Its Electronic Components |
|
S. Ziaei-Rad, M.D. Emami, M. Ziaei-Rad Design Optimization of Supersonic Diffuser Using Genetic Algorithm |
|
Ziaei-Rad, S., Emami, M.D., Ziaei-Rad, M. Design Optimisation Of Supersonic Diffusers Using Adaptive Simulated Annealing |
|
M. D. Emami, S. Ziaei Rad, H. Afshin Application of the Multi-mixture Fraction Model in Numerical Simulation of Combustion |
|
Ziaei-Rad, S., Pishevar, A.R. Wing Planform Design Using Stochastic Optimization Techniques |
|
Ziaei Rad, S. Chaotic Behavior of Mechanical Systems with Backlash |
|
Pishevar, A.R., Ziaei-Rad, S. Wing Planform Design Optimization Using Genetic Algorithm |
|
Ziaei Rad, S. and Ewins, D. J. Finite Element Model Updating of Rotating Structures Using Adaptive Simulated Annealing |
|
Ziaei Rad, S. and Emami, M. D. Design Optimisation In Fluid-Solid Interaction of Aeroelastic Problems |
|
Ziaei Rad, S. , Hadavinia, H., A.J. Kinloch The Modal Analysis of Cracked Tapered Double-Cantilever Beam (TDCB) Bonded Joints |
|
Ziaei Rad, S. and Ewins, D. J. Measuring RDOFs using Laser Doppler Vibrometer |
|
Ziaei Rad, S. and Ewins, D. J. Measurement of Structural Sensitivity with RDOFs and Relative importance of TDOF and RDOF amplitudes |