2019
110) AZIMI M., TOROGHINEJAD M., SHAMANIAN ESFAHANI M., LEO K., "The assessment of growth kinetics in the intermetallic layers of Al-AlxNiy-Ni laminate composites", Proceedings of 7th International Conference on Recrystallization and Grain Growth, PP. 1_7, 2019.
2018
109) SAFARI DASTJERDI N., TOROGHINEJAD M., KHARAZIHA-ESFAHANI M., "Fabrication and characterization of nanocomposites Mg-Al-Graphene for bone regeneration application", Proceedings of The First International Iranian Tissue Engineering and Regenerative medicine congress, 2018.
2017
108) Bagheri A.R., Toroghinejad M.R., Taherizadeh A., Effect of annealing treatment on formability of IF steel – Cu layered composite, Proceeding of 6th International conference on materials engineering and metallurgy, pp. 1-14, 2017.
107) Piermoradi H., Toroghinejad M.R., "Characterizing of nano-structured FeCrCoNiCu high entropy alloy fabricated by mechanical alloying", Proceeding of 6th International conference on materials engineering and metallurgy, pp. 1-14, 2017.
106) Amirkhani E. Toroghinejad M.R., "Investigating of effect of number of accumulative roll bonding cycles on microstracture and mechanical properties of copper foam in present of calcium carbonate", Proceeding of 6th International conference on materials engineering and metallurgy, pp. 1-11, 2017.
105) Sajadi M., Toroghinejad M.R., Karimzadeh F., "Characterizing of Nano-structured AlCoFeNiZn high entropy alloy fabricated by mechanical alloying", Proceeding of 6th International conference on materials engineering and metallurgy, pp. 1-10, 2017.
104) Bagheri A.R., Toroghinejad M.R., Taherizadeh A., "Effect of bond strength on tensile properties of IF steel- CU Layered composite", Proceeding of Steel symposium'95, pp. 1-6, 2017.
103) Moazen P., Toroghinejad M.R., Karimzadeh F, "Effect of Iron on tribological behavior of nano-structured FexCoCrNi (x=1, 1.6) high entropy alloys fabricated by mechanical alloying and spark plasma sintering, 17th national seminar on Surface Engineering, pp. 1-12, 2017.
102) Aboutalebi M., Soltani M., Shafyie A. and Toroghinejad M.R., "Characterizing of XCo-%WC coatings on 316 stainless steel and investigating of their behavior in hot dip galvanizing", 17th national seminar on Surface Engineering, pp. 1-12, 2017 (IF=2.433, Q1).
AHMADI A., TOROGHINEJAD M., NAJAFI-ZADEH A., "Fabrication of hybrid composites of Aluminum/Alumina/Silicon carbide by accumulative roll bonding and evaluation of their microstructure and mechanical properties", Proceedings of Iran International Aluminum Conference (IIAC2012) , 2012.
AKHAVAN S., SAGHAIAN NEJAD A., TOROGHINEJAD M., TAHVILIAN A., "Evolution of microstructure texture for multilayered Al (1100)/Al (5083) composites by accumulative roll bonding process", Proceedings of Iran International Aluminum Conference (IIAC2012), PP. 1-4, 2012.
AKHAVAN S., SAGHAIAN NEJAD A., TOROGHINEJAD M., TAHVILIAN A., "Production of nanostructured composities from multilayered Al pure (1100) and Al-Mg(5083) Al alloys by ARB process: Microstructure evaluation and mechanical properties", Proceedings of Iran International Aluminum Conference (IIAC2012) , 2012.
AKHAVAN S., SAGHAIAN NEJAD A., TOROGHINEJAD M., TAHVILIAN A., BORONE M., "Study on microstructure and mechanical properties of rolled alloy 5083 H112 after heat treating at different temperatures", Proceedings of Iran International Aluminum Conference (IIAC2012), PP. 1-4, 2012.
FARAJZADEH DEHKORDI H., TOROGHINEJAD M., RAISSI K., "Investigation of microstructure and mechanical properties of hybrid composite of Aluminum/Alumina/Titanium carbide produced by rolling processes", Proceedings of Iran International Aluminum Conference (IIAC2012), PP. 1-6, 2012.
HAJATI H., SHAMANIAN ESFAHANI M., TOROGHINEJAD M., "Friction Stir Welding Al-TiC Composite Produced by Accumulative Roll Bonding", Proceedings of Iran International Aluminum Conference (IIAC2012), PP. 1-5, 2012.
SHABANI A., TOROGHINEJAD M., SHAFYEI A., "Investigating the formation of intermetallic compounds and the variation of bond strength between Al-Cu layers after annealing in presence of nickel coating on copper", Proceedings of Iran International Aluminum Conference (IIAC2012), PP. 1-7, 2012.
ZABIHI M., TOROGHINEJAD M., SHAFYEI A., "The Production of Al/Al2O3Composite Strips Using a New Method", Proceedings of Iran International Aluminum Conference (IIAC2012) , 2012.
ZARE H., TOROGHINEJAD M., MERATIAN ISFAHANI M., "Dispersion of Multiwalled Carbon Nanotubes in Aluminum Powders With Ultrasonic and Ball Mill Attrition", Proceedings of International conference on mechanical, Automotive and Materials Engineering (ICMAME'2012), PP. 218-220, 2012.
JAMAATI KENARI R., TOROGHINEJAD M., "Influence of alumina particles on grain size in nanostructured composite manufactured by ARB process", Proceedings of THE THIRD INTERNATIONAL SYMPOSIUM Bulk nanostructured materials: from fundamentals to innovations BNM 2011, PP. 237-238, 2011.
TAHMASEBI SEFID DASHTI M., MERATIAN ISFAHANI M., TOROGHINEJAD M., SHAYAN M., "Textural investigation of 8090 Al-Li alloy fabricated by ECAP", Proceedings of THE THIRD INTERNATIONAL SYMPOSIUM Bulk nanostructured materials: from fundamentals to innovations BNM 2011, PP. 96-97, 2011.
ZARE H., TOROGHINEJAD M., MERATIAN ISFAHANI M., "Consolidation of 2 vol. % carbon nanotube reinforced Al matrix nanocomposites via equal channel angular pressing", Proceedings of THE THIRD INTERNATIONAL SYMPOSIUM Bulk nanostructured materials: from fundamentals to innovations BNM 2011, PP. 248, 2011.
JAMAATI KENARI R., TOROGHINEJAD M., Mohammadi Zahrani E., "A Low Cost Method For Manufacturing of Aluminum/Alumina Composite by Anodizing and CRB Process", Proceedings of TMS 2011 Annual Meeting & Exhibition, PP. 669-679, 2011.
JAMAATIKENARI R., TOROGHINEJAD M., "Production of aluminum/alumina composite by new methods", Proceedings of 15th International Metallurgy & Materials Congress ( IMMC 2010 ) , PP. 38, 2010.
SALIMYANFARD F., TOROGHINEJAD M., ASHRAFIZADEH F., "Investigation of texture of copper processed by new route of ECAP", Proceedings of 15th International Metallurgy & Materials Congress ( IMMC 2010 ) , PP. 138, 2010.
TAHMASEBI SEFID DASHTI M., SHAYAN M., MERATIAN ISFAHANI M., TOROGHINEJAD M., "Influence of ECAP routs on the mechanical properties of pure aluminum", Proceedings of 2nd International Symposium on Bulk Nanostructured Materials:from fundamentals to innovations ( BNM 2009 ), PP. 126-127, 2009.
TAHMASEBI SEFID DASHTI M., SHAYAN M., MERATIAN ISFAHANI M., TOROGHINEJAD M., KHALEGHI FAR M., "Effect of ECAP on mechanical properties of 8090 Al-Li Alloy", Proceedings of 2nd International Symposium on Bulk Nanostructured Materials:from fundamentals to innovations ( BNM 2009 ), PP. 315-316, 2009.
TAHMASEBI SEFID DASHTI M., MERATIAN ISFAHANI M., TOROGHINEJAD M., SHAYAN M., "Mechanical properties of ultrafine-grained pure aluminum by ECAP", Proceedings of 2nd International Congress on Nanoscience & Nanotechnology , PP. 250, 2008.
ASGARI MOSLEHABADI H., ASHRAFIZADEH F., TOROGHINEJAD M., "Effect of substrate grain size on phase layers growth kinetics of zinc hot-dipped coatings", Proceedings of 14th International Metallurgical and Materials congress, PP. 179, 2008.
ASGARI MOSLEHABADI H., BAKHTIARI A., TOROGHINEJAD M., ASHRAFIZADEH F., RAISSI K., "Effect of force variations in skin pass rolling process on texture, corrosion behaviour and roughness of zinc hot-dipped coatings", Proceedings of 14th International Metallurgical and Materials congress, PP. 185, 2008.
SHERBAF M., TOROGHINEJAD M., "Evaluation of Texture and grain size of nano-grained copper produced by ARB Proces", Proceedings of 14th International Metallurgical and Materials congress, PP. 186, 2008.
TOROGHINEJAD M., SHERBAF M., "Microstructural evolution in nano grained copper produced by ARB process", Proceedings of 2nd Conference on Nanostructures (NS2008) , 2008.
SHERBAF M., TOROGHINEJAD M., "Nano-grained copper strip produced by accumulative roll bounding process", Proceedings of 3rd IMS International Conference on:Application of Traditional and High Performance Materials in Harsh Environment, PP. 386-389, 2008.
ASGARI MOSLEHABADI H., ASHRAFIZADEH F., TOROGHINEJAD M., GOLOZAR M., RAISSI K., "Effect of texture on corrosion resistance of hot-dip galvanized coatings", Proceedings of 13th international metallurgy & materials congress, PP. 494-501, 2006.
TOROGHINEJAD M., SAFAEIRAD M., ASHRAFIZADEH F., "Effect of microstructure and texture on formability and mechanical properties of hot-dip galvanized steel sheets", Proceedings of 13th international metallurgy & materials congress, PP. 1464-1471, 2006.
ASGARI MOSLEHABADI H., TOROGHINEJAD M., GOLOZAR M., ASHRAFIZADEH F., RAISSI K., "The role of (00.2) basal texture component and morphology in modifying the corrosion resistance of hot-dip galvanized zinc coating", Proceedings of 45th Annual conference of metallurgists of CIM, COM 2006, PP. 229-241, 2006.
TOROGHINEJAD M., Safaeirad M., ASHRAFIZADEH F., "Effect of Lead content of zinc bath on formability and mechanical properties of hot-dip galvanized steel sheet", Proceedings of 45th Annual conference of metallurgists of CIM, COM 2006, PP. 317-325, 2006.
TOROGHINEJAD M., HUMPHREYS A., ASHRAFIZADEH F., NAJAFI-ZADEH A., JONAS J., "Effect of Rolling Temperature on Recrystallization the Texture of Warm Rolled Steels", Proceedings of THERMEC 2003, PP. 3691-3696, 2003.
HUMPHRYES A., LIU D., TOROGHINEJAD M., JONAS J., "Prediction of Microstructural Development During the Warm Rolling of LC and IF Steels", Proceedings of Microstructural modeling and prediction during THERMOMECHANICAL PROCESSING, PP. 95-103, 2001.
TOROGHINEJAD M., SALEHI M., ASHRAFIZADEH F., "The Effect of Precarburizing Treatment on Morphology of the Boride Layers", Proceedings of 5th World Seminar on Heat Treatment and Surface Engineering, IFHT'95, PP. 343-348, 1995.