National (Farsi) Journal Papers
(THIS SECTION HAS BEEN UPDATED 2015)
• M.R. GARSIVAZ JAZI, M.A. GOLOZAR, K. RAESSI,
The Influence of Anodizing Voltage on Tribocorrosion Behavior of Anodized
Ti-6Al-4V Alloy,
Journal of Advanced Materials for Engineering, (IUT), Vol.33, No. 3, (2015),
37-49.
• A. AGHAJANI, M.A. GOLOZAR, A. SAATCHI, K. RAESSI, S. SHABANI
AC Stray Current and Environmental Effects on Concrete Power Poles,
Modares Civil Engineering Journal (MCEJ), Vol. 14, No. 2, (Summer 2014), 1-12
• A. AGHAJANI, M.A. GOLOZAR, A. SAATCHI, K. RAESSIE,
Studying the Effects of AC Stray Currents with High Voltage on the Concrete
Using Electrochemical Impedance Spectroscopy.
Transportation Research Journal (Pajouheshnameh Haml va Naghl), Published by
Transportation Research Institute, Vol. 11, No. 2, (Summer 2014), 117-133
• Gh.R. VATANKHAH, H.R. BAKHSHANDEHFARD, M.A. GOLOZAR,
M.R. SABZALIAN,
Green Tea Extract (Camellia Sinensis): A None-Toxic Inhibitor for Controlling
Corrosion in Historical Copper Artifacts,
MAREMAT-e ASAR & BAFT-HAYETARIKHI-FARHANGI (Conservation
Studies & Cultural Research), Vol. 2, No. 4 (Fall-Winter 2012-2013), 85--96
• A. AGHAJANI, M.A. GOLOZAR, A. SAATCHI, K. RAESSIE, S. SHABANI
Effect of AC Stray Currents on the Concrete Structures,
Amirkabir Journal of Science & Research (Civil and Environmental Engineering),
(AJSR-CEE), Vol. 45, No. 1, (Summer 2013), 69-80.
(2010)
• S. VAHABZADEH, M.A. GOLOZAR, F. ASHREFIZADEH, A. GHASEMI,
Annealing Effects on Microstructure and Microwave Properties of CuO-Doped
(Zr0.85 Sn0.2)TiO4,
Journal of Advanced Materials for Engineering (IUT), Vol. 27, No. 2, (2009),
199-211.
• F.MOZAFAR, Gh.R. VATANKHAH, H.R. BAKHSHANDEHFARD,
M.A. GOLOZAR,
A Review on the Usage of Corrosion Prevention in Historical Works Made from
Copper and its Alloys,
MAREMAT & PEZHOUHESH (Restoration & Research), Vol. 3, No. 6, (Spring-
Summer 2009), 167-176
- H. Khabbazi, R. Bagheri, M. A. GOLOZAR,
Grafting of maleic anhydride onto co(propylene-b-ethylene) by extrusion process: measurement of adhesion to steel surface,
Esteghlal Journal of Engineering, Vol. 26, No.1, (2007), pp.313-322.
• H. Asgari, M. Toroghi-Nezhad, M. A. GOLOZAR,
Comparison between corrosion resistance of ordinary and skin-passed hot-dip galvanized coating,
Iranian Journal of Surface Science and Engineering, No.3, (2007), pp.25-36.
• E. ROOHANI, H. EDRISS, M. ALIZADEH, A. SAATCHI and M. A. GOLOZAR
Inclusion shape Control and its Effects on the Corrosion and Hydrogen Damage of API Steel in Environments Containing H2 S, Research Bulletin of Isfahan University, vol. 21, No. 1, (2005), pp. 105-124.
• R. RAIESSI, A. SAATCHI, M. A. GOLOZAR
Effect of Current Density and Surface Preparation of Steel on Morphology and Texture of Zinc Electrodeposits
Esteghlal Journal of Engineering, IUT, Vol. 23, No. 2, (March 2005).
(2004)
• A. R. KIANIRASHID, M. A. GOLOZAR
The Microsegregation pattern of Aluminum and Silicon in the Matrix Microstructure of the Nodular Cast Irons
Esteghlal Journal of Engineering, IUT, Vol. 22, No. 2, pp. 177-188, (2004)
• M. FAZEL NAJAFABADI, M.A. GOLOZAR
Pilot In-situ Production of Al-TiB2 Composites Using Reactive Slag
Esteghlal Journal of Engineering, IUT, Vol. 23, No. 1, pp. 179-188, (2004)
• R. MOZAFFARINIA, F. ASHRAFIZADEH, M. A. GOLOZAR
The Production of Ceramic Thin Films by Sol-Gel Method
Esteghlal Journal of Engineering, IUT, Vol. 22, No. 2, pp. 189-200, (2004)
• M. FAZEL NAJAFABADI, M. A. GOLOZAR
In-situ Production of Al-TiC Composite
Journal of Iranian Foundrymen’s Society, Vol. 24, No. 75, pp. 14-19, (2003)
• M. A. GOLOZAR, R. BAGHERY
Quality of High Density Polyethylene on Plain Carbon Steel and the Role of Primers
Esteghlal Journal of Engineering, IUT, Vol. 19, No. 1, September (2000),
pp. 23-33
• A.SAIDI, M. A. GOLOZAR
Production and Evaluation of (Ti-W)C Composite
Esteghlal Journal of Engineering, IUT, Vol. 18, No. 1, September 1999,
pp. 171-180
• M. A. GOLOZAR
Investigation of Diamond Deposition on AISI 316 & 430 Stainless Steel Substrates,
Esteghlal Journal of Engineering, IUT Vol. 16, No. 2, march 1998, pp. 95-103
• M. H. FATHI, V. MORTAZAVI, and M. A. GOLOZAR
Corrosion and Tarnish of Dental Amalgams
Esteghlal Journal of Engineering, IUT, Vol. 15, No. 1, September 1996,
pp. 45-55
• A.R.KIANIRASHID,A.NAJAFIZADEH and M. A. GOLOZAR
Effects of Aluminum on the Microstructures and Mechanical Properties of Austempered Ductile Iron Alloys
Esteghlal Journal of Engineering, IUT, No. 14, March 1994, and pp. 19-35
• M. A. GOLOZAR
Effective Parameters during the Production of Diamond Coatings, Using Combustion Flame Technique
Esteghlal Journal of Engineering, IUT, No. 14, March 1994, pp. 1-17
• M. A. GOLOZAR and A. NAJAFIZADEH
The Effect of Alloying Elements on the Microstructures and Mechanical Properties of Austempered Ductile Iron Alloys
Esteghlal Journal of Engineering, IUT, No.13, Sept.1993, pp. 63-91
• M. A. GOLOZAR and A. SHAHHOSSEINI
Ti-Microalloyed Steel Quenched from Hot Forging Temperature
Memoirs of the Faculty of Engineering, Tehran, Iran, No. 53, December 1993, pp. 157-181
• M. A. GOLOZAR
Modern Diamond and Diamond-Like Films
Journal of Electroplating, Vol. 1, No. 3, 1993, pp. 3-10.
• A.R. RIAHI, A. SAATCHI and M. A. GOLOZAR
An Investigation on The Corrosion of Copper and Aluminum Alloys in The Caspian sea Water
Journal of Engineering, Iran University of Science and Technology,
Vol. 2, Nos. 1&2,1991, pp. 43-54
• M. A. GOLOZAR
The Role of Cathodic Poisons on the Stress Corrosion Cracking of Zircalloy-2 in Methanolic Solutions Containing 0.4 Vol.% HCl
Esteghlal Journal of Engineering, No. 9, March 1990, pp. 31-77
• A.NAJAFIZADEH and M. A. GOLOZAR
Microstructure and Mechanical properties of Austempered Ductile Iron Alloy Containing Various Percentages of Copper
Esteghlal Journal of Engineering, IUT, No. 8, 1989, pp. 31-59