International Conference Papers
(THIS SECTION HAS BEEN UPDATED 2014)
• S. KHORSAND., K. RAEISSI, M.A. GOLOZAR,
"The effect of texture and surface morphology on the corrosion resistance of zinc
electrodeposits", Proceedings of European Corrosion Congress 2014-EUROCORR
2014
• H.R. SALIMIJAZI, Z.A. MOUSAVI, M.A. GOLOZAR, J. MOSTAGHIMI,
T. COYLE,
Nucleation and Growth Transformations in Vacuum Plasma Sprayed Ti-6Al-4V
Alloy,
Proceedings of the International Thermal spray Conference (May 13-15, 2013,
Busan, South Korea), pp. 460-464, 2013.
• F. MALLAKPOUR, M. GOLOZAR, Z. DADKHAH, M.A. GOLOZAR,
K. RAEISSI,
Nano-crystalline Nickel Coatings Electrodeposited on Plain Carbon Steel in Watts-
Type Bath With and Without Additives, Proceedings of 1st New and Advanced
Materials International Congress, (NAMIC 2012, Iran), 2012.
(2010)
• F SAMIEE, K. RAEISSI, M.A. GOLOZAR,
Heat Treatment of Nanostructured ZrO2 Corrosion Barrier Coatings on 316L
Stainless Steel,
European Corrosion Congress 2010, EUROCORR 2010, 1, pp.485-492.
• H.R. SALIMI JAZI, E. ABEDI, M.A. GOLOZAR, J. MOSTAGHIMI,
L. PERSHIN
Study of the Corrosion Behavior of Al wire Arc Sprayed on Mild Steel for Off Shore
Applications,
International Thermal Spray Conference & Exhibition, May 2010, Singapore.
• M. ASKARI, M.A. GOLOZAR, K. RAEISSI, D. MASOURI
Pitting Corrosion of Carbon Steel in Lean and rich Systems in Gas Sweeting Process
With Diglycolamine,
European Corrosion Congress 2009, EUROCORR 2009, 4, pp. 2596-2607.
• H. Asgari, F. Ashrafizadeh, M. R. Toroghinejad, M. A. GOLOZAR, K. Raeissi
Effect of texture on corrosion resistance of hot-dip galvanized coatings
Proceeding of the 13th International Metallurgy-Materials Congress, pp. 494-501, 09-11 November 2006, Istanbul, Turkey
• K. Karim Dehnavi, M. Gharaat, M. A. GOLOZAR, H. Najjar Azari,
Effect of thermomechanical treatment on mechanical properties and stress corrosion cracking behavior of cast ingot of 7075 aluminum alloy
CD of The 14th annual (International) Conference of Mechanical Engineering (ISME2006), Also book of abstracts, p.231, Isfahan, Iran, 16-18 May, 2006.
• H. Asgari, M.R. Toroghinejad, M. A. GOLOZAR, F. Ashrafizadeh and K. Raeissi
The Role of (00.2) Basal Texture Component and Morphology in Modifying the corrosion resistance of hot-dip galvanized zinc coatings,
Proceeding of the 45th Annual Conference of Metallurgists of CIM, 2006, pp.229-241, Montreal, Quebec, Canada.
(2005)
• A. ASHRAFI, S. MALLAKPOUR, and M. A. GOLOZAR
Replacement of chromate Conversion Coating with Polypyrrole for Corrosion Control on Aluminum 7075 Surface
CD of The 14 th International Seminar on Polymer Science and Technology (ISPST 2005), Also book of Abstracts, p 268, Tehran, Iran, September 27-29, 2005.
• A. ASHRAFI, S. MALLAKPOUR, and M .A GOLOZAR
Effect of Substrate Pretreatment on Morphology of Polypyrrole Coating on 316L Stainless Steel,
Ibid, CD and Book of Abstracts, p. 274
• M. A. GOLOZAR, J. MOSTAGHIMI, T. COYLE, and R. SOLTANI
Wear and Tribological properties of Air Plasma Sprayed Nano and Conventional Zirconia Coatings
CD of 17th International Symposium on Plasma Chemistry, (also Book of Extended Abstracts pp. 996-997) August 7th –12th, 2005, Toronto, Canada.
• M.A. GOLOZAR, J.MOSTAGHIMI, T. COYLE, and R. SOLTANI
Wear Behavior of Nanostructured and Conventional Y-PSZ Coatings,
Proceedings of CIM, COM 2005, Calgary, Canada August 21st-24th, 2005, pp. 273-285
• A. GHASEMI, F. ASHRAFIZADEH, and M. A. GOLOZAR
Effects of Alumina Silica Sol-Gel Coating on the Hot Corrosion and Static Oxidation Resistance of Nickel Substrates,
Ibid, pp. 449-458
• A. ASHRAFI, M. A. GOLOZAR, and S. MALLAKPOUR
Effect of Substrate Pretreatment on Corrosion Resistance of Polypyrrole Coated Aluminum Alloy 7075,
Ibid, pp. 477-485
• M. A. GOLOZAR, J. MOSTAGHIMI, and T. COYLE
Partially Stabilized Zirconia (8wt%Y2O3-ZrO2), a Wear Resistant Thermal Barrier Coating, 13th
CD of Annual (International) Mechanical Engineering Conference, Isfahan University of Technology, Isfahan Iran. May 2005, Also, Book of Abstracts.
• A. ASHRAFI, M.A. GOLOZAR, S. MALLAKPOUR, and A. GHASEMI
Effects of Pyrrole and N-Methylpyrrole Coatings on Corrosion Resistance of Mild Steel
Transactions of Materials and Heat Treatment, Proceedings of the 14th IFHTSE Congress, China, Vol.25, No. 5, October 2004, PP. 1138-1141
• A. GHASEMI, F. ASHRAFIZADEH, M.A. GOLOZAR, , and A.ASHRAFI
Effect of Catalyst on the Formation of Silica Coating on Nickel Substrate by Sol-Gel Processing,
Ibid, pp. 1295-1298.
• K. RAEISSI, A. SAATCHI, and M. A. GOLOZAR
Electrochemical Variable Dependence of Zinc Electrodeposited onto Electropolished Steel Substrate
Proceedings of the International Symposium on Environmental Degradation of Materials and Corrosion Control in Metals, 42nd Annual Conference of Metallurgist of CIM, August 24-27, 2003, Vancouver, Canada, pp. 71-83
• A. ASHRAFI, M. A.GOLOZAR, and S. MALLAKPOUR
Electropolymerized Coating of Pyrrol and Methylpyrrole on Mild Steel Surface
Ibid, pp. 545-554
• R. MOZAFFARINIA, F.ASHRAFIZADEH, M.A.GOLOZAR and A. GHASEMI
SiO2/SiO2-ZnO Optical Multylayer Coatings Fabricated by Sol-Gel Method. Proceedings of the International Symposium on Ecomaterials and Ecoprocesses, Ibid, pp. 113-122
• M. FAZEL NAJAFABADI and M. A. GOLOZAR
In Situ Production of Al-TiC Composites by Reactive Slag Process, Proceedings of 3rd International Conference on Composite Science and Technology, 21-23 January 2003, Durban, South Africa
• A. R. KIANI RASHID, and M.A. GOLOZAR
The Microsegregation Pattern of Aluminum and Silicon in the Matrix Microstructure of the Nodular Cast Iron
17th International Congress on X-Ray Optics and Microanalysis, ICXOM XVII Congress, 22-26 September 2003, Chamonix, France
• R. BAGHERI and M. A. GOLOZAR
Adhesion of Polyethylene to Carbon Steel: Study of Effective Parameters
Proceedings of EURADH 2002, 6th European Adhesion Conference and ADHESION’02, 8th International Conference On the Science and Technology of Adhesion and Adhesives, 10-13 September 2002, University of Strathclyde, Glasgow, UK, pp.363-366
• M. A. GOLOZAR, SH. MALLAKPOUR, and A. ASHRAFI
Production and Characterization of Copolymer Coatings of Pyrrol and Methylpyrrole On Mild Steel, Produced by Electropolymerization from T4SNa Aqueous Solution
UK CORROSION 2002, 22-24 October 2002, Wales, UK.
• V.MORTAZAVI, M.H.FATHI, and M. A. GOLOZAR
The Effect of Clinical Procedures on the Surface Characteristics and Corrosion Behavior of High Copper Dental Amalgam
Proceedings of CIM, COM 2002, August 11-14, 2002, Montreal, Quebec, Canada
• M FAZEL NAJAFABADI, M. A. GOLOZAR, A. SAIDI, H.EDRIS
Microstructural Characterization and Wear Behaviour of Aluminum Matrix TiB2 Composite, Prepared by In-situ Processing
MMC VIII, Metallic Composites and Foams, 26-27 November 2001, The Institute of Materials, London, UK
• H. N. AZARI and M. A. GOLOZAR
Microstructural Characterization of D.C. Cast High Strength 7075 Aluminum Alloy
Proceedings of the First International & Third Bi-Annual National Conference of the Iranian Aerospace Society, Sharif University of Technology, Tehran, Iran, 29 Dec.2000-1Jan.2001
• H. N. AZARI and M. A. GOLOZAR
Microstructural Characterization of 7075 High Strength Aluminum Alloy
Ibid, Book of Abstracts
• M. A. GOLOZAR and R.BAGHERI
Fluidized Bed Powder Coating of High-Density Polyethylene on Plain Carbon Steel
Book of Abstract, 5th International Symposium on Advanced Materials, Islamabad, Pakistan, September 21-25, 1997, p.14
• M. A. GOLOZAR
Optimizing Toughness and Wear Resistance of 70Cr2 Steel For Grinding Balls, Using Heat Treatment
Book of The Abstracts, 36th Annual Conference of Metallurgist and 27th Annual Hydrometallurgical Meeting of CIM, Sudbury, Ontario, Canada, Laurentian University, August, 17-20, 1997, p. 112.
• M. A. GOLOZAR and R. BAGHERI
Spray Electrostatic Powder Coating of High-Density Polyethylene on Plain Carbon Steel
Proceedings of The International Symposium on Materials Solutions for Environmental Problems, 36th Annual Conference of Metallurgist of CIM, Sudbury, Ontario, Canada August, 17-20, 1997, pp. 189-199.
• A. SAIDI, M. A. GOLOZAR, and J.L.F. KELLIE
Combustion Synthesis of Fe-TiC and Fe-(W,Ti)C Composite
Proceedings of The International Symposium on Thermomechanical Processing and Metallurgy of Titanium Alloys, Australia, July, 1997
• M. A. GOLOZAR
Morphological Aspects of Diamond/Diamond-Like Coatings, The Role of Substrate Materials and Substrate Surface Treatments.
Proceedings of the 3rd International Scientific-Technological Conference on Influence of Production Engineering, a State of Surface Layer-SL96, Poland, October 16-18, 1996
• A.SAATCHI, M. A. GOLOZAR, and R. MOZAFFARINIA
Evaluation of Aluminum Alloy 5083 Weldments to Stress Corrosion Cracking in Sea Water.
Proceedings of The Second Arabian Corrosion Conference, Kuwait, October 12-15,1996, pp. 301-307
• M. A. GOLOZAR, A. SAATCHI, and M. A. SOLTANI
Fatigue Behaviour of Case Hardened Cr-Mo Steel
Proceedings of the 10th Congress of the International Federation for Heat treatment and Surface Engineering, Brighton, UK, September 1-5, 1996.
• M. A. GOLOZAR
Deposition of Diamond on Stainless Steels Using Combustion Flame Technique
Proceedings of The Fifth World Seminar on Heat Treatment and Surface Engineering, IFHT'95, Isfahan, Iran, September 26-29, 1995, pp. 427-432
• A. NAJAFIZADEH and M. A. GOLOZAR
Influence of Chemical Composition on The Strength of Austempered Ductile Iron Alloys
Proceedings of The 10th International Conference on the Strength of Materials, The Japans Institute of Metals, Japan, 1994, pp. 229-332
• M. A. GOLOZAR and M.H. FATHI
Corrosion of Dental Amalgams in Solutions of Sodium Chloride and Sodium Sulfide
Corrosion Asia, The Second NACE Asian Conference, Singapore, September 26-30, 1994, Paper No. 1057
• M. A. GOLOZAR and A. NAJAFIZADEH
Aqueous Corrosion of AL-Cu-Ni Ductile Iron Alloys
Ibid, Paper No. 1056
• M. A. GOLOZAR and A. SAATCHI
Corrosion and Stress Corrosion Cracking of a Marine Steel in Artificial and Natural Sea Water
Proceedings of The NACE International Corrosion Conference, Texas, USA, 1993, pp. 3660- 3670
• M. A. GOLOZAR and A.M. SHAHHOSSEINI
Forged and Direct Quenched Ti-Microalloyed Steel, the Mechanical Properties and Fracture Mode
Proceedings of the Forth International Seminar, Environmentally and Energy Efficient Heat Treatment Technologies, International Federation for Heat Treatment and Surface Engineering (IFHT), Beijing, China, September 15-17, 1993, pp. 138-147.
• A. NAJAFIZADEH and M. A. GOLOZAR
Effects of Chemical Composition on The Microstructural Evolution and Mechanical Behaviour of Austempered Ductile Iron
Extended Abstract, Ibid, pp. 458-459
• M. A. GOLOZAR and A. NAJAFIZADEH
The Microstructure and Properties of Isothermally Transformed Nodular Cast Iron Alloys
Extended Abstract, Ibid, p. 457
• A. SAATCHI and M. A. GOLOZAR
Marine Corrosion Survey in Persian Gulf and Caspian Sea Water
Proceedings of The First NACE Asian Corrosion Conference, Corrosion Asia, Singapore, September 7-11, 1992, Paper No. 1141
• M. A. GOLOZAR and A.R. RIAHI
Blistering Phenomenon in Zirconium and Zirconium alloys
Advances in Corrosion and Protection, A Conference to Recognize The 20th Anniversary of The Corrosion and Protection Center, UMIST, UK, 26th June -3rd July, 1992
• M. A. GOLOZAR, I. R. McCOLL, D.M.GRANT and J.V.WOOD
Combustion Flame Grown Diamond Films
Second European Conference on Diamond, Diamond-Like and Related Coatings, Nice, France September 2-6, 1991, pp. 262-269
• D.M.GRANT, I.R. McCOLL, M. A. GOLOZAR, J.V. WOOD, and
N. St. BRAITHWAITE
Plasma Assisted CVD for Biomedical Applications.
Ibid. pp. 727-730
• P. MAJUMDAR, M. A. GOLOZAR, and J.C. SCULLY
Stress Corrosion Crack Propagation in Zircalloy-2 in CH3OH/HCl
Proceedings of The Third International Conference on the Effect of Hydrogen on Behaviour of Materials, Jackson Lake Lodge, Wyoming, August 1980, pp. 881-889