M. Ahmadian, D. Wexler, A. Calka and T. Chandra, “Liquid phase sintering of WC- FeAl and WC-Ni3Al composites with and without boron”, Materials Science Forum (2003) 426-432(3): p.1951-1956.
M. Ahmadian, D. Wexler, T. Chandra and A. Calka, “Abrasive wear of WC-FeAl-B and WC-Ni3Al-B composites” International Journal of Refractory Metals and Hard Materials 23 (2005) p.155-159.
M. Ahmadian, D. Wexler, A. Calka and T. Chandra, “The effects of boron on the hardness and fracture toughness of WC-FeAl-B and WC-Ni3Al-B composites”, Materials Science Forum (2007) 539-543(3): p.962-967.
M. Ahmadian, T. Chandra, D. Wexler and A. Calka, ”Effect of boron on the WC morphology in sub micron tungsten carbide composites based on aluminide binders”, Materials Science Forum (2007) 561-565: p.675-678
M. Ahmadian, D. Wexler, T. Chandra and A. Calka, "Liquid phase sintering of sub micron WC composites containing new binders based on boron doped aluminids", International Journal of Modern Physics B (2008), Vol.: 22, Issues: 18-19, p.3296-3303
M. Ahmadian, M. Reid, R. Dippenaar, T. Chandra, D. Wexler, and A. Calka, "In situ observation of the densification behavior of WC-FeAl-B composites during liquid phase sintering", Materials Science Forum (2010) 638-642: p.921-926.
S. Vafaeian, M. Ahmadian, B. Rezaei, "Sulphuric acid leaching of mechanically activated copper sulphidic concentrate", Minerals Engineering, No 24, (2011), p.1713-1716
M. Habibi Rad, M. Ahmadian, M.A. Golozar, "Investigation of the corrosion behavior of WC–FeAl–B composites in aqueous media", Int. Journal of Refractory Metals and Hard Materials 35 (2012) 62–69
A. Farzin, M. Ahmadian, M.H. Fathi “Comparative evaluation of biocompatibility of dense nanostructured and microstructured Hydroxyapatite/Titania composites” Materials Science and Engineering C 33 (2013), p.2251–2257
M. Esnaashary, M.H. Fathi, and M. Ahmadian. "The Effect of the Two‐Step Sintering Process on Consolidation of Fluoridated Hydroxyapatite and its Mechanical Properties and Bioactivity." International Journal of Applied Ceramic Technology 11.1 (2014): 47-56.
A. Farzin, M. Ahmadian, and M. H. Fathi. "Comparative evaluation of biocompatibility of dense nanostructured and microstructured Hydroxyapatite/Titania composites." Materials Science and Engineering: C 33.4 (2013): 2251-2257.
M. Esnaashary, M.H. Fathi, and M. Ahmadian. "In vitro evaluation of human osteoblast-like cell proliferation and attachment on nanostructured fluoridated hydroxyapatite." Biotechnology letters 36.6 (2014): 1343-1347.
A. Farzin, M. Ahmadian, and M. H. Fathi. "Comparative evaluation of biocompatibility of dense nanostructured and microstructured Hydroxyapatite/Titania composites." Materials Science and Engineering: C 33.4 (2013): 2251-2257.
M. Salehi, A. Saidi, M. Ahmadian, & K. Raeissi. "Characterization of nanocrystalline Nickel–Cobalt alloys synthesized by direct and pulse electrodeposition." International Journal of Modern Physics B, 28(06) (2014), 1450043.
M. Taghian Dehaghani, M. Ahmadian, and M.H. Fathi. "Effect of ball milling on the physical and mechanical properties of the nanostructured Co–Cr–Mo powders." Advanced Powder Technology 25.6 (2014): 1793-1799.
M. Bahrami, M. H. Fathi, and M. Ahmadian. "The effect of nanobioceramic reinforcement on mechanical and biological properties of Co-base alloy/hydroxyapatite nanocomposite." Materials Science and Engineering: C 48 (2015): 572-578.
M. S. Hejazi, M. Meratian, M. Ahmadian, and M. H. Fathi. "Effect of alumina amount on the bioactivity of dense magnesium fluorapatite/alumina composite in simulated body fluid (SBF) using Taguchi method." J Bioprocess Biotech 5.219 (2015): 2.
Z. Noori, M. Panjepour, and M. Ahmadian. "Study of the effect of grain size on melting temperature of Al nanocrystals by molecular dynamics simulation." Journal of Materials Research 30.10 (2015): 1648-1660.
M. Taghian Dehaghani, and M. Ahmadian. "Effect of sintering temperature and time on the mechanical properties of Co–Cr–Mo/58S bioglass porous nano-composite." Bulletin of Materials Science 38.5 (2015): 1239-1246.
M. Taghian Dehaghani, M. Ahmadian, and M.H. Fathi. "Synthesis, characterization, and bioactivity evaluation of amorphous and crystallized 58s bioglass nanopowders." International Journal of Applied Ceramic Technology 12.4 (2015): 867-874.
M. Taghian Dehaghani, M. Ahmadian, and B. Hashemi Beni. "Fabrication and characterization of porous Co–Cr–Mo/58S bioglass nano-composite by using NH4HCO3 as space-holder." Materials & Design 88 (2015): 406-413.
Y. Nasiri, M. Panjepour, and M. Ahmadian. "The kinetics of hematite reduction and cementite formation with CH4-H2-Ar gas mixture." International Journal of Mineral Processing 153 (2016): 17-28.
M. Taghian Dehaghani, and M. Ahmadian. "Porous vitalium-base nano-composite for bone replacement: Fabrication, mechanical, and in vitro biological properties." Journal of the Mechanical Behavior of Biomedical Materials 57 (2016): 297-309.
M. Mottaghi, and M. Ahmadian. "Comparison of the wear behavior of WC/(FeAl-B) and WC-Co composites at high temperatures." International Journal of Refractory Metals and Hard Materials 67 (2017): 105-114.
A. Sobhani, M. Rafienia, M. Ahmadian, and M.R. Naimi-Jamal. "Fabrication and characterization of polyphosphazene/calcium phosphate scaffolds containing chitosan microspheres for sustained release of bone morphogenetic protein 2 in bone tissue engineering." Tissue Engineering and Regenerative Medicine 14, no. 5 (2017): 525-538.
M. Taghian Dehaghani, and M. Ahmadian. "Processing of porous Co-base nano-composite using carbonate hydrogen ammonium spacer particles." Materials Technology 32.4 (2017): 231-238.
A.H. Tavakolizadeh, M. Ahmadian, M.H. Fathi, A. Doostmohammadi, E. Seyedjafari, and A. Ardeshirylajimi. "Investigation of osteoinductive effects of different compositions of bioactive glass nanoparticles for bone tissue engineering." Asaio Journal 63, no. 4 (2017): 512-517.
F. Ebrahimfar, and M. Ahmadian. "Purification of metallurgical-grade silicon by acid leaching." Silicon 11.4 (2019): 1979-1987.
A. Gorji, M. Panjepour, and M. Ahmadian. "Study of Morphology and Magnesium Purity, Formed by Vapor Phase Through Silicothermic Reduction." Metallurgical and Materials Transactions B 49.5 (2018): 2435-2443.
M. Rahmati, M.H. Fathi, and M. Ahmadian. "Preparation and structural characterization of bioactive bredigite (Ca7MgSi4O16) nanopowder." Journal of Alloys and Compounds 732 (2018): 9-15.
M. Taghian Dehaghani, and M. Ahmadian. "Fracture mechanism of CoCrMo porous nano-composite prepared by powder metallurgy route." International Journal of Engineering 31.1 (2018): 19-24.
J. Alizadeh, M. Panjepour, and M. Ahmadian. "Using the non-vibrational mathematical model to investigate the mechanical behavior of FeAl single crystal derived from molecular dynamics simulation." Materials Research Express 6.11 (2019): 1165h8.
F. Ghafuri, M. Ahmadian, R. Emadi, and M. Zakeri. "Effects of SPS parameters on the densification and mechanical properties of TiB2-SiC composite." Ceramics International 45, no. 8 (2019): 10550-10557.
J. Alizadeh, M. Panjepour, and M. Ahmadian. "Modeling the Stretch Behavior of the Single-Crystal Ni–Al Alloy and Its Molecular Dynamics Simulation." Physics of the Solid State 62.1 (2020): 83-91.
M. Haftbaradaran-Esfahani, M. Ahmadian, and A.H. Nassajpour-Esfahani. "Fabrication and characterization of porous biomedical Vitallium alloy with 58S bioglass coating prepared by sol-gel method." Applied Surface Science 506 (2020): 144959.
F. Ghafuri, R. Emadi, M. Ahmadian, and M. Zakeri. "Effect of short carbon fiber content on the mechanical properties of TiB2‐based composites prepared by spark plasma sintering." International Journal of Applied Ceramic Technology 18, no. 5 (2021): 1691-1701.
Sh. Ghorbanzadeh Sheish, R. Emadi, M. Ahmadian, S. Sadeghzade, and F. Tavangarian. "Fabrication and characterization of polyvinylpyrrolidone-eggshell membrane-reduced graphene oxide nanofibers for tissue engineering applications." Polymers 13, no. 6 (2021): 913.
H. Elahi Davaji, F. Shamoradi, M. Panjepour, and M. Ahmadian. "Preparation and characterization of carbon felt/carbon composites by chemical vapor infiltration process." Carbon Letters (2021): 1-15.
M. H. Mirmusavi, M. Ahmadian, S. Karbasi. "Polycaprolactone-chitosan/multi-walled carbon nanotube: A highly strengthened electrospun nanocomposite scaffold for cartilage tissue engineering", International Journal of Biological Macromolecules (2022): 1-14
E. Majidnia, M. Ahmadian, H. Salehi, N. Amirpour. "Development of an electrospun poly(ε‑caprolactone)/collagen‑based human amniotic membrane powder scaffold for culturing retinal pigment epithelial cells" Scientific Reports: (2022) 1-17
E. Majidnia, N. Amirpour, M. Ahmadian, F. Karamali and H. Salehi. "The Effect of Aligned and Random PCL-Human Amniotic
Membrane Powder Scaffolds on Retinal Tissue Engineering", Advances in Materials Science and Engineering (2023): 1-11.
Aydin Houshyar 1, Mehdi Ahmadian, Yashar Azizian‑Kalandaragh, Noushin Amirpour & Hossein Salehi. "Fabrication and properties evaluation of chitosan/BaTiO3 composite membranes for the periodontitis treatment", Scientific Reports (2024): 1-12.